The following list of standards posted for public comment are drawn from the ANSI Standards Action Bulletin, Standards Development Organization (SDO) websites, and/or submitted to Women in Standards by the publishing SDO. Standards posted for public comment provides an opportunity for those not involved in the drafting of the standard to share their thoughts, ideas, concerns, and proposed solutions regarding the draft standard.

The Women in Standards SDO Directory includes information on joining an SDO’s standards development committee(s) and submitting public comment, or visit the Standards Action page or SDO website for additional information and to submit comment. (To submit a standard for inclusion in the below list, email admin@womeninstandards.org)

TIP: For guidance on crafting a strong public comment, click here!

AAFS, AAMI, AARST Consortium, ABMA, ACI, AGA, AMCA, APCO, API, APTech, ASA, ASC X9, ASCE, ASHRAE, ASME, ASPE, ASSP, ASTM, ATCC, AVIXA, AWI, AWWA, AWS, B11 Standards, BHMA, BSI, camts, CAN-CGSB, CEMA, CGA, CIOSC, CSA, Consumer Technology Association, DSI, ECIA, ESTA, EOS/ESD, FM, HFES, HI, HPS, IAPMO, ICC, IEC, IEEE, IES, IIAR IPSASB, ISO, ITI, ITSDF, MHI, NASBLA, NECA, NEMA, NENA, NFPA, NSF, OGC, PDA, RESNET, SAIA, SCTE, SPRI, TCIA, TNI, UAMA, UL, VC, VITA

AAFS

  • BSR/ASB BPR 108-202x, Forensic Odontology in Disaster Victim Identification: Best Practice Recommendations for the Medicolegal Authority (new standard) – comment due February 22
  • BSR/ASB Std 070-202x, Standard for Examination of Handwritten Items (new standard) – comment due February 22
  • BSR/ASB Std 145-202x, Standard for Consultation during Friction Ridge Examination (new standard) – comment due March 8
  • BSR/ASB Std 054-202x, Standard for a Quality Control Program in Forensic Toxicology Laboratories (new standard) – comment due March 15
  • BSR/ASB Std 152-202x, Standard for Minimum Content Requirements of Forensic Toxicology Procedures (new standard) – comment due March 15
  • ASB Best Practice Recommendation 008, Mass Fatality Scene Processing: Best Practice Recommendations for the Medicolegal Authority, First Edition – comment due March 22
  • ASB Standard 085, Standard for Detection Canine Selection, Kenneling, and Healthcare, First Edition – comment due March 22
  • ASB Standard 133, Standard for Age Estimation in Forensic Anthropology, First Edition – comment due March 22
  • ASB Standard 146, Standard for Resolving Commingled Remains in Forensic Anthropology, First Edition – comment due March 22
  • ASB Standard 150, Standard for Determination of Medicolegal Significance from Skeletal Remains in Forensic Anthropology, First Edition – comment due March 22
  • BSR/ASB Std 092-202x, Standard for Training and Certification of Canine Detection of Explosives (new standard) – comment due March 29
  • BSR/AAFS ASB BPR 052-202x, Best Practice Recommendation for the Detection and Collection of Footwear and Tire Impression Evidence (new standard) – comment due April 4
  • BSR/AAFS ASB Std 137-202x, Standard for Examination and Documentation of Footwear and Tire Impression Evidence (new standard) – comment due April 4

AAMI

  • BSR/AAMI/ISO 13408-5-2012 (R202x), Aseptic processing of health care products – Part 5: Sterilization in place (reaffirm a national adoption ANSI/AAMI/ISO 13408-5-2012 (R2015)) – comment due March 8

AARST Consortium

  • AARST MAMF-2017, Protocol for Conducting Measurements of Radon and Radon Decay Products in Multifamily Buildings – comment due March 7
  • AARST MALB-2014, Protocol for Conducting Measurements of Radon and Radon Decay Products In Schools and Large Buildings – comment due March 7
  • BSR/AARST MALB 01-Addenda-202x, Protocol for Conducting Measurements of Radon and Radon Decay Products In Schools and Large Buildings (addenda to ANSI/AARST MALB-2014) – comment due March 7
  • BSR/AARST MAMF 01-Addenda-202x, Protocol for Conducting Measurements of Radon and Radon Decay Products in Multifamily Buildings (addenda to ANSI/AARST MAMF-2017) – comment due March 7

ABMA

  • BSR ABMA ISO 12240-1-AXX-202x, Spherical plain bearings – Part 1: Radial spherical plain bearings (identical national adoption of ISO 12240-1:1998 and revision of) – comment due February 22
  • BSR ABMA ISO 12240-2-AXX-202x, Spherical plain bearings – Part 2: Angular contact radial spherical plain bearings (identical national adoption of ISO 12240-2:1998) – comment due February 22
  • BSR ABMA ISO 12240-3-AXX-202x, Spherical plain bearings – Part 3: Thrust spherical plain bearings (identical national adoption of ISO 12240-3:1998) – comment due February 22
  • BSR ABMA ISO 12240-4-AXX-202x, Spherical plain bearings – Part 4: Spherical plain bearing rod ends (identical national adoption of ISO 12240-4:1998) – comment due February 22

ACI

AGA

  • BSR GPTC Z380.1-201 TR 19-25-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 17-28-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 17-30-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 17-39-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 19-03-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 19-05-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 19-12-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 19-21-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 19-24-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 19-27-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 19-38-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 19-45-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 19-51-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 19-58-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 19-62-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 19-63-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 20-10-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 20-13-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22
  • BSR GPTC Z380.1-202x TR 20-20-202x, Guide for Transmission, Distribution and Gathering Piping Systems (addenda to ANSI/AGA GPTC Z380.1-2018) – comment due March 22

AMCA

APCO

  • BSR/APCO/TMA 2.101.3-202x, Alarm Monitoring Company to Emergency Communications Center (ECC) Computer Aided Dispatch (CAD) Automated Secure Alarm Protocol (ASAP) (revision and redesignation of ANSI/APCO/CSAA 2.101.2-2014) – comment due March 15

API

API allows public commenting through their online portal found here. Instructions on submitting a comment can be found here. A short list of standards posted for comment are provided below.

  • BSR/API Std 614 Pt 1, 5th Ed/ISO 10438-1, 1st Edition-2007 (R202x), Lubrication, Shaft-Sealing and Oil-Control Systems and Auxiliaries – Part 1: General Requirements (reaffirm a national adoption ANSI/API Std 614 Pt 1, 5th Ed/ISO 10438-1, 1st Edition-2007) – comment due February 22
  • BSR/API Std 614 Pt 2, 5th Ed/ISO 10438-2, 1st Ed-2007 (R202x), Lubrication, Shaft-Sealing and Oil-Control Systems and Auxiliaries – Part 2: Special-Purpose oil systems (reaffirm a national adoption ANSI/API Std 614 Pt 2, 5th Ed/ISO 10438-2, 1st Ed-2007) – comment due February 22
  • BSR/API Std 614 Pt 3, 5th Ed/ISO 10438-3, 1st Ed-2007 (R202x), Lubrication, Shaft-Sealing and Oil-Control Systems and Auxiliaries – Part 3: General-Purpose oil Systems (reaffirm a national adoption ANSI/API Std 614 Pt 3, 5th Ed/ISO 10438-3, 1st Ed-2007) – comment due February 22
  • BSR/API Std 614 Pt 4, 5th Ed/ISO 10438-4, 1st Ed-2007 (R202x), Lubrication, Shaft-Sealing and Oil-Control Systems and Auxiliaries – Part 4: Self-Acting Gas Seal Support Systems (reaffirm a national adoption ANSI/API Std 614 Pt 4, 5th Ed/ISO 10438-4, 1st Ed-2007) – comment due February 22
  • API RP 1161, 5th Ed. – Remote Evaluations – comment due February 25
  • BSR/API 19G4 (ISO 17078-4)-2011 (R202x), Practices for Side-Pocket Mandrels and Related Equipment (reaffirm a national adoption ANSI/API 19G4 (ISO 17078-4)-2011) – comment due April 5
  • BSR/API MPMS CH. 14.3.3-2012 (R202x), Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids – Concentric, Square-Edged Orifice Meters, – Part 3: Natural Gas Applications (reaffirmation of ANSI/API MPMS CH. 14.3.3-2012) – comment due April 5
  • BSR/API MPMS Ch. 21.1-2011 (R202x), Flow Measurement Using Electronic Metering Systems – Electronic Gas Measurement (reaffirmation of ANSI/API MPMS Ch. 21.1-2011) – comment due April 5
  • BSR/API MPMS Chapter 2.2C, 1st Edition-2002 (R202x), Calibration of Upright Cylindrical Tanks Using the Optical-Triangulation Method (reaffirm a national adoption ANSI/API MPMS Chapter 2.2C, 1st Edition-2002 (R2015)) – comment due April 5
  • BSR/API MPMS Chapter 2.2E, 1st Edition-2004 (R202x), Petroleum and Liquid Petroleum Products – Calibration of Horizontal Cylindrical Tanks – Part 1: Manual Methods (reaffirm a national adoption ANSI/API MPMS Chapter 2.2E, 1st Edition-2004 (R2015)) – comment due April 5
  • BSR/API MPMS Chapter 2.2F, 1st Edition-2004 (R202x), Petroleum and Liquid Petroleum Products – Calibration of Horizontal Cylindrical Tanks – Part 2: Internal Electro-optical Distance-ranging Method (reaffirm a national adoption ANSI/API MPMS Chapter 2.2F, 1st Edition-2004 (R2015)) – comment due April 5
  • BSR/API Spec 10D/ISO 10427-1-2010 (R202x), Specification for Bow-Spring Casing Centralizers (reaffirm a national adoption ANSI/API Spec 10D/ISO 10427-1-2010 (R2015)) – comment due April 5
  • BSR/API Specification 19G3 (ISO 17078-3)-2011 (R202x), Running Tools, Pulling Tools and Kick-Over Tools and Latches for SidePocket Mandrels (reaffirm a national adoption ANSI/API Specification 19G3 (ISO 17078-3)-2011) – comment due April 5
  • BSR/API Standard 662, Part 1-2011 (R202x), Plate Heat Exchangers for General Refinery Services – Part 1: Plate and Frame Heat Exchangers (reaffirm a national adoption ANSI/API Standard 662, Part 1-2011) – comment due April 5

APTech

  • BSR/CGATS 21-2-202X, Graphic technology – Printing from digital data across multiple technologies – Part 2: Reference characterization data-2020 (revision of ANSI/CGATS 21-2-202X) – comment due March 22
  • BSR CGATS/ISO 12640-1-2007 (R202x), Graphic technology – Prepress digital data exchange – Part 1: CMYK standard colour image data (CMYK/SCID) (reaffirmation of ANSI CGATS/ISO 12640-1-2007 (R2015)) – comment due March 29
  • BSR CGATS/ISO 12640-2-2007 (R202x), Graphic Technology – Prepress Digital Data Exchange – Part 2: XYX/SRGB Encoded Standard Colour Image Data (XYZ/SCID) (reaffirm a national adoption ANSI CGATS/ISO 12640-2-2007 (R2013)) – comment due March 29
  • ANSI CGATS.7-2003 (R2013), Graphic technology – Pallet loading for printed materials (withdrawal of ANSI CGATS.7-2003 (R2013)) – comment due March 29
  • BSR CGATS/ISO 15930-3-2004/ISO 15930-3-2002 (R202x), Graphic technology – Prepress digital data exchange – Use of PDF – Part 3: Complete exchange suitable for color managed workflows (PDF/X-3) (reaffirm a national adoption ANSI CGATS/ISO 15930-3-2004/ISO 15930-3-2002 (R2013)) – comment due April 5

ASA

  • BSR/ASA S1.22-202x/IEC 60263-202x, Scales and sizes for plotting frequency characteristics and polar diagrams (identical national adoption of IEC 60263:2020) – comment due February 22

ASC X9

  • BSR X9.145-202x, Framework for Financial Instrument Identification (new standard) – comment due February 22
  • BSR X9.100-110-202x, Document Imaging Compatibility (revision of ANSI X9.100-110-2015) – comment due March 8
  • BSR X9.100-187-202x, Electronic Exchange of Check and Image Data (revision of ANSI X9.100-187-2016) – comment due March 8
  • BSR X9.143-202x, Interoperable Secure Key Exchange Key Block Specification for Symmetric Algorithms (new standard) – comment due March 22

ASCE

ASHRAE

  • 1st Public Review of BSR/ASHRAE Addendum b to Standard 30-2019, Method of Testing Liquid Chillers – comment due February 15
  • 1st Advisory Public Review of BSR/ASHRAE Addendum d to Standard 30-2019, Method of Testing Liquid Chillers – comment due February 15
  • 1st Public Review of BSR/ASHRAE Standard 153-2015R, Method of Test for Mass Flow Capacity of Four-Way Refrigerant Reversing Valves – comment due February 15
  • BSR/ASHRAE/IES Addendum u to BSR/ASHRAE/IES Standard 90.1-202x, Energy Standard for Buildings Except Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/IES Standard 90.1-2019) – comment due 28 February
  • BSR/ASHRAE/IES Addendum v to BSR/ASHRAE/IES Standard 90.1-202x, Energy Standard for Buildings Except Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/IES Standard 90.1-2019) – comment due 28 February
  • BSR/ASHRAE/IES Addendum y to BSR/ASHRAE/IES Standard 90.1-202x, Energy Standard for Buildings Except Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/IES Standard 90.1-2019) – comment due March 15
  • BSR/ASHRAE Standard 203-2018 (R202x), Method of Test for Determining Heat Gain of Office Equipment Used in Buildings (reaffirmation of ANSI/ASHRAE Standard 203-2018) – comment due March 29
  • BSR/ASHRAE Standard 41.3-202x, Standard Methods for Pressure Measurements (revision of ANSI/ASHRAE Standard 41.3-2014) – comment due April 5
  • BSR/ASHRAE Standard 41.6-202x, Standard Methods for Humidity Measurements (revision of ANSI/ASHRAE Standard 41.6-2014) – comment due April 5

ASME

  • BSR/ASME BPVC Section XII-202x, Rules for Construction and Continued Service of Transport Tanks (revision of ANSI/ASME BPVC Section XII-2019) – comment due February 21
  • BSR/ASME NUM-1-202x, Rules for Construction of Cranes, Monorails, and Hoists (with Bridge or Trolley or Hoist of the Underhung Type) (revision of ANSI/ASME NUM-1-2016) – comment due February 21
  • BSR/ASME BPVC Section XI-202x, Section XI Rules for Inservice Inspection of Nuclear Power Plant Components (revision of ANSI/ASME BPVC Section XI-2019) – comment due February 23
  • BSR/ASME A17.8-2016/CSA B44.8-202x, Standard for wind turbine tower elevators (revision of ANSI/ASME A17.8-2016/CSA B44.8-2016) – comment due March 8
  • BSR/ASME A120.1-202x, Safety Requirements for Powered Platforms and Traveling Ladders and Gantries for Building Maintenance (revision of ANSI/ASME A120.1-2014) – comment due March 15
  • BSR/ASME B30.18-202x, Stacker Cranes (Top or Under Running Bridge, Multiple Girder With Top or Under Running Trolley Hoist) (revision of ANSI/ASME B30.18-2016) – comment due March 21
  • BSR/ASME B30.9-202x, Slings (revision of ANSI/ASME B30.9-2018) – comment due April 5
  • BSR/ASME B30.22-202x, Articulating Boom Cranes (revision of ANSI/ASME B30.22-2016) – comment due April 5

ASPE

  • BSR/WQA/ASPE S-801-2015 (R202x), Sustainable Management (reaffirmation of ANSI/WQA/ASPE S-801-2015) – comment due February 22

ASSP

  • BSR/ASSP Z359.11-202X, Safety Requirements for Full Body Harnesses (revision and redesignation of ANSI/ASSE Z359.11-2014) – comment due February 15
  • BSR/ASSP Z359.14-202x, Safety Requirements for Self-Retracting Devices for Personal Fall Arrest and Rescue Systems (revision and redesignation of ANSI/ASSE Z359.14-2014) – comment due February 28
  • BSR/ASSP Z9.4-2011 (R202x), Abrasive-Blasting Operations Ventilation and Safe Practices For Fixed Location Enclosures (reaffirmation and redesignation of ANSI/AIHA Z9.4-2011) – comment due March 15

ASTM

  • BSR/ASTM WK60578-202x, Test Method for Walkway Friction Testing using Portable Walkway Tribometers (new standard) – comment due February 22
  • BSR/ASTM WK62968-202x, Practice for Butt-Fusion Joining of Cross-Linkable Polyethylene (CX-PE) Pipe and Tubing (new standard) – comment due February 22
  • BSR/ASTM WK74677-202x, Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PERT/AL/PE-RT) Composite Pressure Pipe 1 based on Inner Diameter (ID) for use in Air Conditioning and Refrigeration Line (new standard) – comment due February 22
  • BSR/ASTM F477-2014 (R202x), Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe (reaffirmation of ANSI/ASTM F477-2014) – comment due February 22
  • BSR/ASTM F913-2017 (R202x), Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe (reaffirmation of ANSI/ASTM F913-2017) – comment due February 22
  • BSR/ASTM F2609-2011 (R202x), Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners (reaffirmation of ANSI/ASTM F2609-2011 (R2015)) – comment due February 22
  • BSR/ASTM F2880-2014 (R202x), Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 34 in. to 65 in. (reaffirmation of ANSI/ASTM F2880-2014) – comment due February 22
  • BSR/ASTM D1785-202x, Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 (revision of ANSI/ASTM D1785-2015E1) – comment due February 22
  • BSR/ASTM D2239-202x, Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter (revision of ANSI/ASTM D2239-2012A (R2020)) – comment due February 22
  • BSR/ASTM D2661-202x, Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings (revision of ANSI/ASTM D2661-2014E1) – comment due February 22
  • BSR/ASTM D2737-202x, Specification for Polyethylene (PE) Plastic Tubing (revision of ANSI/ASTM D2737-2012A (R2020)) – comment due February 22
  • BSR/ASTM D2774-202x, Practice for Underground Installation of Thermoplastic Pressure Piping (revision of ANSI/ASTM D2774 -2020) – comment due February 22
  • BSR/ASTM D3035-202x, Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter (revision of ANSI/ASTM D3035-2015) – comment due February 22
  • BSR/ASTM D3212-202x, Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals (revision of ANSI/ASTM D3212-2020) – comment due February 22
  • BSR/ASTM F431-202x, Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners (revision of ANSI/ASTM F431-1999 (R2013)) – comment due February 22
  • BSR/ASTM F558-202x, Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners (revision of ANSI/ASTM F558-2018) – comment due February 22
  • BSR/ASTM F714-202x, Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter (revision of ANSI/ASTM F714-2013 (R2019)) – comment due February 22
  • BSR/ASTM F820-202x, Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems (revision of ANSI/ASTM F820-2018) – comment due February 22
  • BSR/ASTM F1951-202x, Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment (revision of ANSI/ASTM F1951-2014) – comment due February 22
  • BSR/ASTM F2105-202x, Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems (revision of ANSI/ASTM F2105-2018) – comment due February 22
  • BSR/ASTM F3034-202x, Specification for Billets Made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE) (revision of ANSI/ASTM F3034-2015 (R2020)) – comment due February 22
  • BSR/ASTM F3313-202x, Test Method for Determining Impact Attenuation of Playground Surfaces within the Use Zone of Playground Equipment as Tested in the Field (revision of ANSI/ASTM F3313-2020) – comment due February 22
  • BSR/ASTM F3431-202x, Specification for Determining Flammability of Materials for Recreational Camping Tents and Warning Labels for Associated Hazards (revision of ANSI/ASTM F3431-2020) – comment due February 22
  • BSR/ASTM D7082-202x, Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe (revision of ANSI/ASTM D7082-2015) – comment due March 8
  • BSR/ASTM E329-202x, Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection (revision of ANSI/ASTM E329-2020) – comment due March 22
  • BSR/ASTM E2708-202x, Terminology for Accreditation and Certification (revision of ANSI/ASTM E2708-2018A) – comment due March 22
  • BSR/ASTM F859-202x, Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type (revision of ANSI/ASTM F859-2015) – comment due March 22
  • BSR/ASTM F1361-202x, Test Method for Performance of Open Vat Fryers (revision of ANSI/ASTM F1361-2017) – comment due March 22
  • BSR/ASTM F1964-202x, Test Method for Performance of Pressure Fryers (revision of ANSI/ASTM F1964-2011 (R2019)) – comment due March 22
  • BSR/ASTM F2144-202x, Test Method for Performance of Large Open Vat Fryers (revision of ANSI/ASTM F2144-2017) – comment due March 22

ATCC

  • BSR/ATCC ASN-0002-202x, Authentication of Human Cell Lines: Standardization of Short Tandem Repeat (STR) Profiling (revision of ANSI/ATCC ASN-0002-2011) – comment due March 22

AVIXA

  • BSR/AVIXA V201.01-202x, Image System Contrast Ratio (revision and redesignation of ANSI/INFOCOMM 3M-2011) – comment due March 7

AWS

  • BSR/AWS A5.32M/A5.32-202x (ISO 14175-2008 MOD), Welding Consumables – Gases and Gas Mixtures for Fusion Welding and Allied Processes (national adoption of ISO 14175:2008 with modifications and revision of ANSI/AWS A5.32/A5.32M:2011 (ISO 14175:2008)) – comment due February 22
  • BSR/AWS G2.4/G2.4M-202x, Guide for the Fusion Welding of Titanium and Titanium Alloys (revision of ANSI/AWS G2.4/G2.4M-2014) – comment due March 29
  • B2.4:20XX, Specification for Welding Procedure and Performance Qualification for Thermoplastics – comment due April 12
  • G1.6:20XX, Specification for the Training, Qualification, and Company Certification of Thermoplastic Welding Inspector Specialists and Thermoplastic Welding Inspector Assistants – comment due April 12

AWWA

  • BSR/AWWA B304-202x, Liquid Oxygen for Ozone Generation for Water, Wastewater, and Reclaimed Water Systems (revision of ANSI/AWWA B304-2018) – comment due March 8
  • BSR/AWWA C671-202x, Online Turbidimeter Operation and Maintenance (revision of ANSI/AWWA C671-2015) – comment due March 29

B11 Standards

  • BSR B11.6-202x, Safety Requirements for Manual Turning Machines with or without Automatic Control (revision of ANSI B11.6-2001 (R2020)) – comment due March 15
  • BSR B11.8-202x, Safety Requirements for Manual Milling, Drilling and Boring Machines with or without Automatic Control (revision of ANSI B11.8-2001 (R2020)) – comment due March 15

BHMA

  • BSR/BHMA A156.8-202x, Door Controls – Overhead Stops and Holders (revision of ANSI/BHMA A156.8-2015) – comment due March 15
  • BSR/BHMA A156.15-202x, Release Devices – Closer Holder, Electromagnetic and Electromechanical (revision of ANSI/BHMA A156.15-2015) – comment due March 15

BSI

BSI standards in the development process can be found listed here

  • BS ISO/IEC 30171 Internet of Things (IoT) – Base station based underwater acoustic network (B-UWAN) – Overview and requirements – comment due March 3
  • BS IEC 60287-1-1 Ed3.0 Electric cables – Calculation of the current rating -. Part 1-1: Current rating equations (100 % load factor) and calculation of losses – General – comment due March 30
  • BS EN 60287-1-2 Ed 2.0 Electric cables – Calculation of the current rating -. Part 1: Current rating equations (100 % load factor) and calculations of losses – Section 2: Sheath eddy current loss factors for two circuits in flat formation – comment due March 30
  • BS EN IEC 60598-2-2 Ed 3.0 Luminaires -. Part 2: Particular requirements – Section 18: Luminaires for swimming pools and similar applications – comment due March 30
  • BS EN IEC 61300-3-4 BS EN 61300-3-4 Ed.4.0 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures. Part 3-4: Examinations and measurements – Attenuation – comment due March 31
  • BS EN 60287-2-1 Ed 3.0 Electric cables – Calculation of the current rating -. Part 2-1: Thermal resistance – Calculation of the thermal resistance – comment due April 7
  • BS EN IEC 60287-1-3 BS EN 60287-1-3 Ed 2.0 Electric cables – Calculation of the current rating -. Part 1-3: Current rating equations (100 % load factor) and calculation of losses – Current sharing between parallel single-core cables and calculation of circulating current losses – comment due April 7
  • BS EN IEC 60286-2 Packaging of components for automatic handling. – Part 2: Tape packaging of components with unidirectional leads on continuous tapes – comment due April 7

camts

CAN/CGSB

  • CAN/CGSB-3.18 Diesel Fuel for Locomotive—Type Medium—Speed Diesel Engines / ICS 75.160.20 – comment due March 11
  • CAN/CGSB-3.5—Automotive gasoline / ICS 75.160.20 – comment due April 06
  • CAN/CGSB-3.511—Oxygenated automotive gasoline containing Ethanol (E1-E10 and E11-E15) / ICS 75.160.20 – comment due April 06

CEMA

  • BSR/CEMA Standard 501.1-202x, Specifications for Welded Steel Wing Pulleys (revision and redesignation of ANSI/CEMA 501.1-2015) – comment due April 5
  • BSR/CEMA Standard B105.1-202x, Specification for Welded Steel Conveyor Pulleys with Compression Type Hubs (revision and redesignation of ANSI/CEMA B105.1-2015) – comment due April 5

CGA

  • BSR/CGA M-1-202x, Standard for Medical Gas Supply Systems at Health Care Facilities (revision of ANSI/CGA M-1-2018) – comment due April 13

CIOSC

  • CAN/CIOSC 104:20XX (D4) Baseline cyber security controls for small and medium organizations – comment due April 1

CSA

  • NGV 6.1 – Compressed natural gas (CNG) fuel storage and delivery systems for road vehicles (New Edition) – comment due February 23
  • BSR Z21.90a-202x, Gas Convenience Outlets and Optional Enclosures (same as CSA 6.24a) (addenda to ANSI Z21.90-2019) – comment due March 8
  • BSR/CSA PRD 1-202x, Pressure relief devices for natural gas vehicle (NGV) fuel containers (addenda to ANSI/PRD 1-2020) – comment due March 8
  • BSR/CSA HPRD 1-202x, Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers (revision of ANSI/CSA HPRD 1-2013 (R2018)) – comment due March 8

Consumer Technology Association

  • B182.12 – Profile polypropylene (PP) storm sewer pipe and fittings (New Edition) – comment due February 22
  • BSR/CTA 909-B-2010 (R202x), Antenna Control Interface (reaffirmation of ANSI/CTA 909-B-2010 (R2016)) – comment due April 5
  • BSR/CTA 2009-B-2010 (R202x), Performance Specification for Public Alert Receivers (reaffirmation of ANSI/CTA 2009-B-2010) – comment due April 5

ECIA

  • BSR/EIA 364-70D-202x, Temperature Rise Versus Current Test Procedure for Electrical Connectors and Sockets (revision and redesignation of ANSI/EIA 364-70C-2014) – comment due March 15
  • BSR/EIA 977-2017 (R202x), Test Method Electronic Passive Components Exposure to Atmospheric Sulfur (reaffirmation of ANSI/EIA 977-2017) – comment due March 22

EOS/ESD

  • BSR/ESD S8.1-202x, ESD Association Standard for Protection of Electrostatic Discharge Susceptible Items – Symbols – ESD Awareness (revision of ANSI/ESD S8.1-2017) – comment due March 29
  • BSR/ESD STM11.13-202x, ESD Association Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items – Two-Point Resistance Measurement (revision of ANSI/ESD STM11.13-2018) – comment due March 29

ESTA

  • BSR E1.28-2011 (R202x), Guidance on planning followspot positions in places of public assembly (reaffirmation of ANSI E1.28 -2011 (R2016)) – comment due April 5
  • BSR E1.57-2016 (R202x), Recommendations to prevent falls on or off movable parade floats, movable stages, and similar moving platforms (reaffirmation of ANSI E1.57-2016) – comment due April 5

FM

  • BSR/FM 1950-2016 (R202x), Seismic Sway Braces for Pipe, Tubing and Conduit (reaffirmation of ANSI/FM 1950-2016) – comment due March 15

HFES

  • BSR/HFES 400-202x, Human Readiness Level Scale in the System Development Process (new standard) – comment due March 15

HPS

  • BSR N13.1-202x, Sampling and Monitoring Releases of Airborne Radioactive Substances from the Stacks and Ducts of Nuclear Facilities (revision of ANSI N13.1-2011) – comment due March 29

IAPMO

  • BSR/ASSE 1098-202x, Performance Requirements for Atmospheric Vacuum Breakers for Vacuum Toilet Assemblies and Galley Waste Disposal Units on Commercial Aircraft (new standard) – comment due February 22
  • Uniform Plumbing Code (UPC) – comment due February 22

ICC

  • BSR/ICC 300-2017 (R202x), ICC Standard on Bleachers, Folding and Telescopic Seating, and Grandstands (reaffirmation of ANSI/ICC 300-2017) – comment due March 8
  • BSR/ICC A117.1-202x, Standard for Accessible and Usable Buildings and Facilities (revision of ANSI/ICC A117.1-2017) – comment due April 5
  • BSR/ICC 1200-202x, Standard for Off-Site Construction: Planning, Design, Fabrication and Assembly (new standard) – comment due April 5
  • BSR/ICC 1205-202x, Standard for Off-Site Construction: Inspection and Regulatory Compliance (new standard) – comment due April 5

IEC

All commenting is via IEC’s free online platform here.

  • IEC 60519-4 ED5: Safety in electroheating installations – Part 4: Particular requirements for arc furnace installations – comment due February 26
  • IEC 60318-7 ED1: “Electroacoustics – Simulators of human head and ear – Part 7: Head and torso simulator for the measurement of sound sources close to the ear” – comment due February 26
  • IEC 60335-2-10 ED6: Household and similar electrical appliances – Safety – Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines – comment due February 26
  • IEC 60335-2-13 ED7: Household and similar electrical appliances – Safety – Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances – comment due February 26
  • IEC 60335-2-28 ED5: Household and similar electrical appliances – Safety – Part 2-28: Particular requirements for sewing machines – comment due February 26
  • IEC 60335-2-36 ED7: Household and similar electrical appliances – Safety – Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements – comment due February 26
  • IEC 60335-2-37 ED7: Household and similar electrical appliances – Safety – Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers – comment due February 26
  • IEC 60335-2-38 ED6: Household and similar electrical appliances – Safety – Part 2-38: Particular requirements for commercial electric griddles and griddle grills – comment due February 26
  • IEC 60335-2-39 ED7: Household and similar electrical appliances – Safety – Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans – comment due February 26
  • IEC 60335-2-42 ED6: Household and similar electrical appliances – Safety – Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens – comment due February 26
  • IEC 60335-2-44 ED4: Household and similar electrical appliances – Safety – Part 2-44: Particular requirements for ironers – comment due February 26
  • IEC 60335-2-47 ED5: Household and similar electrical appliances – Safety – Part 2-47: Particular requirements for commercial electric boiling pans – comment due February 26
  • IEC 60335-2-48 ED5: Household and similar electrical appliances – Safety – Part 2-48: Particular requirements for commercial electric grillers and toasters – comment due February 26
  • IEC 60335-2-49 ED5: Household and similar electrical appliances – Safety – Part 2-49: Particular requirements for commercial electric hot cupboards – comment due February 26
  • IEC 60335-2-50 ED5: Household and similar electrical appliances – Safety – Part 2-50: Particular requirements for commercial electric bains-marie – comment due February 26
  • IEC 60335-2-52 ED4: Household and similar electrical appliances – Safety – Part 2-52: Particular requirements for oral hygiene appliances – comment due February 26
  • IEC 60335-2-55 ED4: Household and similar electrical appliances – Safety – Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds – comment due February 26
  • IEC 60335-2-59 ED4: Household and similar electrical appliances – Safety – Part 2-59: Particular requirements for insect killers – comment due February 26
  • IEC 60335-2-64 ED4: Household and similar electrical appliances – Safety – Part 2-64: Particular requirements for commercial electric kitchen machines – comment due February 26
  • IEC 60335-2-74 ED3: Household and similar electrical appliances – Safety – Part 2-74: Particular requirements for portable immersion heaters – comment due February 26
  • IEC 60335-2-78 ED3: Household and similar electrical appliances – Safety – Part 2-78: Particular requirements for outdoor barbecues – comment due February 26
  • IEC 60335-2-99 ED2: Household and similar electrical appliances – Safety – Part 2-99: Particular requirements for commercial electric hoods – comment due February 26
  • IEC 60335-2-106 ED2: Household and similar electrical appliances – Safety – Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings – comment due February 26
  • IEC 60335-2-119 ED1: Household and similar electrical appliances – Safety – Part 2-119: Particular requirements for vacuum packaging machines – comment due February 26
  • IEC 62304 Ed. 2: Health software – Software life cycle processes – comment due February 26
  • IEC 60794-1-31 ED2: Optical fibre cables – Part 1-31: Generic specification – Optical cable elements – Optical fibre ribbon – comment due February 26
  • IEC 61757-5-1 ED1: Fibre optic sensors – Part 5-1: Tilt measurement – Tilt sensors based on fibre Bragg gratings – comment due February 26
  • IEC 61757-3-2 ED1: Fibre Optic Sensors – Part 3-2: Acoustic sensing and vibration measurement – Distributed sensing – comment due February 26
  • IEC 61280-1-3 ED3: Fibre optic communication subsystem test procedures – Part 1-3: General communication subsystems – Measurement of central wavelength, spectral width and additional spectral characteristics – comment due February 26
  • IEC 61757-2-1 ED1: Fibre Optic Sensors – Part 2-1: Temperature measurement – Temperature sensors based on fibre Bragg gratings – comment due February 26
  • IEC 61937-11 ED2: Digital audio – Interface for nonlinear PCM encoded audio bitstreams applying IEC 60958 – Part 11: MPEG-4 AAC and its extensions and MPEG-D USAC in LATM/LOAS (TA 20) – comment due February 26
  • IEC 63186 ED1: Nuclear power plants – Instrumentation and control systems important to safety – Criteria for seismic trip system – comment due March 5
  • IEC 60910 ED2: Nuclear power plants – Instrumentation systems important to safety – Containment monitoring for early detection of developing deviations from normal operation in light water reactors – comment due March 5
  • IEC 63120 ED1: Refurbishment of medical electrical equipment, medical electrical systems and sub-assemblies and reuse of components as part of the extended life-cycle – comment due March 5
  • IEC 61966-2-4/AMD2 ED1: Amendment 2 – Multimedia systems and equipment – Colour measurement and management – Part 2-4: Colour management – Extended-gamut YCC colour space for video applications – xvYCC (TA 2) – comment due March 5
  • IEC 62980 ED1: Parasitic communication protocol for radio-frequency wireless power transmission (TA 15) – comment due March 5
  • IEC 63254 ED1: Management and Interfaces for WPT – Device to device wireless charging (D2DWC) for mobile devices with wireless power TX/RX module (TA 15) – comment due March 5
  • IEC 62906-5-7 ED1: Laser displays – Part 5-7: Measuring methods of image quality affected by speckle for scanning laser displays – comment due March 5
  • IEC 62906-5-1 ED1: Laser displays – Part 5-1: Measurement of optical performance for laser front projection – comment due March 5
  • IEC/IEEE 80005-1/AMD1 ED2: Amendment 1 – Utility connections in port – Part 1: High voltage shore connection (HVSC) systems – General requirements – comment due March 12
  • IEC 62868-2-3 ED1: Organic Light Emitting Diode (OLED) for general lighting – Safety – Part 2-3: Particular requirements – Flexible OLED tiles and panels – comment due March 12
  • IEC 61970-456 ED3: Energy management system application program interface (EMS-API) – Part 456: Solved power system state profiles – comment due March 12
  • IEC 60092-503 ED3: Electrical installations in ships – Part 503: Special features – AC supply systems with voltages in the range of above 1 kV up to and including 15 kV – comment due March 19
  • IEC 63294 ED1: Test methods for electric cables with rated voltages up to and including 450/750 V – comment due March 19
  • IEC 60143-2/AMD1 ED2: Amendment 1 – Series capacitors for power systems – Part 2: Protective equipment for series capacitor banks – comment due March 19
  • IEC 61196-1-212 ED1: Coaxial communication cables – Part 1-212: Environmental test methods – UV stability – comment due March 19
  • IEC 61196-6 ED2: Coaxial communication cables – Part 6: Sectional specification for CATV drop cables – comment due March 19
  • IEC 61196-6-1 ED2: Coaxial communication cables – Part 6-1: Blank detail specification for CATV drop cables – comment due March 19
  • IEC 63171-6 ED2: Connectors for electrical and electronic equipment – Part 6: Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for power and data transmission with frequencies up to 600 MHz. – comment due March 19
  • IEC 61918/AMD1 ED4: Amendment 1 – Industrial communication networks – Installation of communication networks in industrial premises – comment due March 19
  • IEC 60958-3 ED4: Digital audio interface – Part 3: Consumer applications (TA 20) – comment due March 19
  • IEC 60958-1 ED4: Digital audio interface – Part 1: General (TA 20) – comment due March 19
  • IEC 62841-3-6/AMD1 ED1: Amendment 1 – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-6: Particular requirements for transportable diamond drills with liquid system – comment due March 19
  • IEC 62841-3-10/AMD1 ED1: Amendment 1 – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-10: Particular requirements for transportable cut-off machines – comment due March 19
  • IEC 62841-3-12/AMD1 ED1: Amendment 1 – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-12: Particular requirements for transportable threading machines – comment due March 19
  • IEC 63203-406-1 ED1: Wearable electronic devices and technologies – Part 406-1: Test method for measuring surface temperature of wrist worn wearable electronic devices while in contact with human skin – comment due March 19
  • IEC 63277 ED1: Performance test method of binary power generation systems with the capacity less than 100kW – comment due March 19
  • IEC 63168-1 ED1: Cooperative multiple systems in connected home environments – AAL functional safety requirements of electronic safety-related systems – Part 1: General requirements for design and development – comment due March 19
  • IEC 63168-2 ED1: Cooperative multiple systems in connected home environments – AAL functional safety requirements of electronic safety-related systems – Part 2: Concept phase of product design – comment due March 19
  • IEC 63168-3 ED1: Cooperative multiple systems in connected home environments – AAL functional safety requirements of electronic safety-related systems – Part 3: Product development – comment due March 19
  • IEC 63168-4 ED1: Cooperative multiple systems in connected home environments – AAL functional safety requirements of electronic safety-related systems – Part 4: Production, operation, modification and supporting process – comment due March 19
  • IEC 60034-9 ED5: Rotating electrical machines – Part 9: Noise limits – comment due March 26
  • IEC 60800 ED4: Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation – comment due March 26
  • IEC 61196-7 ED2: Coaxial communication cables – Part 7: Sectional specification for cables for BCT cabling in accordance with ISO/IEC 11801-4 – Indoor drop cables for systems operating at 5 MHz – 6 000 MHz – comment due March 26
  • IEC 61587-1 ED5: Mechanical structures for electrical and electronic equipment – Tests for IEC 60917 and IEC 60297 series – Part 1: Environmental requirements, test set-up and safety aspects – comment due March 26
  • IEC 60688 ED4: Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals – comment due March 26
  • IEC 63296-1 ED1: Portable multimedia equipment – Determination of battery duration – Part 1: Powered loudspeaker equipment (TA 19) – comment due March 26
  • IEC 62841-3-5 ED1: Electric motor-operated hand=held tools, transportable tools and lawn and garden machinery – Safety – Part 3-5: Particular requirements for transportable band saws – comment due March 26
  • IEC 60700-1/AMD1 ED2: Amendment 1 – Thyristor valves for high voltage direct current (HVDC) power transmission – Part 1: Electrical testing – comment due April 2
  • IEC 60700-2/AMD1 ED1: Amendment 1 – Thyristor valves for high voltage direct current (HVDC) power transmission – Part 2: Terminology – comment due April 2
  • IEC 61954 ED3: Static var compensators (SVC) – Testing of thyristor valves – comment due April 2
  • IEC 60079-17 ED6: Explosive atmospheres – Part 17: Electrical installations inspection and maintenance – comment due April 2
  • IEC 62047-40 ED1: Semiconductor devices – Micro-electromechanical devices – Part 40:Test methods of Micro-electromechanical inertial shock switch threshold – comment due April 2
  • IEC 61753-101-3 ED2: Fibre optic interconnecting devices and passive components performance standard – Part 101-03: Fibre management systems for Category OP – Outdoor protected environment – comment due April 2
  • IEC 61753-111-7 ED2: Fibre optic interconnecting devices and passive components performance standard – Part 111-07: Sealed closures for category A – Aerial – comment due April 2
  • IEC 61753-111-9 ED2: Fibre optic interconnecting devices and passive components performance standard – Part 111-09: Sealed closures for category S – Subterranean – comment due April 2
  • IEC 61400-13/AMD1 ED1: Amendment 1 – Wind turbines – Part 13: Measurement of mechanical loads – comment due April 2
  • IEC 61189-2-807 ED1: Test methods for electrical materials, printed board and other interconnection structures and assemblies – Part 2-807: Test methods for materials for interconnection structures – Decomposition Temperature (Td) using TGA – comment due April 2
  • IEC 62977-3-7 ED1: Electronic displays – Part 3-7: Evaluation of optical performances – Tone characteristics – comment due April 2
  • ISO/IEC 14165-432 : Information technology – Fibre channel – Part 432: Security protocols – 2 (FC-SP-2) – comment due April 2
  • IEC 62271-203 ED3: High-voltage switchgear and controlgear – Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV – comment due April 9
  • IEC 60747-5-14 ED1: Semiconductor devices – Part 5-14: Optoelectronic devices – Light emitting diodes – Test method of the surface temperature based on the thermoreflectance method – comment due April 9
  • IEC 60747-5-15 ED1: Semiconductor devices – Part 5-15: Optoelectronic devices – Light emitting diodes – Test method of the flat-band voltage based on the electroreflectance spectroscopy – comment due April 9
  • IEC 60747-5-4 ED2: Semiconductor devices – Part 5-4: Optoelectronic devices – Semiconductor lasers – comment due April 9
  • IEC 61753-131-03 ED1: Fibre optic interconnecting devices and passive components – Performance standard – Part 131-3: Single-mode mechanical fibre splice for category OP – Outdoor Protected environment – comment due April 9
  • IEC 61340-5-3 ED3: Electrostatics – Part 5-3: Protection of electronic devices from electrostatic phenomena – Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices – comment due April 16

IEEE

  • BSR N42.53-202x, Standard Performance Criteria for Backpack- Based Radiation-Detection Systems Used for Homeland Security (revision of ANSI N42.53-2013) – comment due March 15

IES

  • BSR/IES RP-7-202x, Recommended Practice: Lighting Industrial Facilities (addenda to ANSI/IES RP-7-2020) – comment due March 7

IIAR

  • BSR/IIAR CO2-202X, Safety Standard for Closed-Circuit Carbon Dioxide Refrigeration Systems (new standard) – comment due March 14

IPSASB

ISO

(note: ISO has over 300 standards open for public comment, we’ve included a selection of these in this list. To comment on a standard, contact your national member. For full listing, click here.)

  • ISO/IEC DIS 23510 Information technology — 3D Printing and Scanning — Framework for Additive Manufacturing Service Platform (AMSP)
  • ISO/DIS 24281 Textiles — Biaxial tensile properties of woven fabric — Determination of maximum force and elongation at maximum force using the grab method
  • ISO 7010:2019/DAMD 113 Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 113: Safety sign M059: Wear laboratory coat
  • ISO/IEC DIS 10918-7 Information technology — Digital compression and coding of continuous-tone still images — Part 7: Reference software
  • ISO/DIS 23020 Space Systems — Determination of test methods to characterize material or component properties required for break-up models used for Earth re-entry
  • ISO/DIS 24121 Space data and information transfer systems — Spectral preprocessing transform for multispectral and hyperspectral image compression
  • ISO/DIS 23854 Fermented meat products — Specification
  • ISO/DIS 50005 Energy management systems — Guidelines for a phased implementation
  • ISO/DIS 12934 Tractors and machinery for agriculture and forestry — Basic types — Vocabulary
  • ISO/DIS 23623 Ageing Societies — Framework for Dementia-inclusive communities

ITI

  • INCITS 572-202x, Information technology – UAS-3 USB Attached SCSI-3 (UAS-3) (new standard) – comment due March 2

ITSDF

  • BSR/ITSDF B56.6-202X, Safety Standard for Rough Terrain Forklift Trucks (revision of ANSI/ITSDF B56.6-2016) – comment due March 8

MHI

  • BSR MH1-202X, Pallets, Slip Sheets, and Other Bases for Unit Loads (revision of ANSI MH1-2016) – comment due March 22

NASBLA

  • BSR/NASBLA 100-202x, Basic Boating Knowledge – Core (new standard) – comment due March 1
  • BSR/NASBLA 101-202x, Basic Boating Knowledge – Plus Human-Propelled (revision of ANSI/NASBLA 101-2017) – comment due March 1
  • BSR/NASBLA 102-202x, Basic Boating Knowledge – Plus Sailing (revision of ANSI/NASBLA 102-2017) – comment due March 1
  • BSR/NASBLA 103.1-202x , Supplement – Basic Boating Knowledge – Plus Water-Jet Propelled (revision of ANSI/NASBLA 103.1-2018) – comment due March 1
  • BSR/NASBLA 103-202x, Basic Boating Knowledge – Plus Power (revision of ANSI/NASBLA 103-2016) – comment due March 1

NECA

  • BSR/NECA 5-202X, Recommended Practice for Prefabrication of Electrical Installations for Construction (new standard) – comment due February 22

NEMA

  • BSR C12.32-202x, Electricity Meters for the Measurement of DC Energy (new standard) – comment due March 1
  • BSR C136.49-2016 (R202x), Roadway and Area Lighting Equipment – Plasma Lighting (reaffirmation of ANSI C136.49-2016) – comment due March 1
  • BSR C136.23-202X, Roadway and Area Lighting Equipment – Enclosed Architectural Luminaires (revision of ANSI C136.23-2012) – comment due March 1
  • BSR C136.27-202x, Roadway and Area Lighting Equipment – Tunnel and Underpass Lighting Luminaires (revision of ANSI C136.27-2012) – comment due March 1
  • BSR C136.45-2011 (S202x), Aluminum Lighting Poles (stabilized maintenance of ANSI C136.45-2011 (R2016)) – comment due March 1
  • BSR/NEMA 62321-3-2-202x, Determination of certain substances in electrotechnical products – Part 3-2: Screening – Fluorine, bromine and chlorine in polymer and electronics by combustion-ion chromatography (C-IC) (identical national adoption of IEC 62321-3-2:2020) – comment due March 15

NENA

  • BSR/NENA STA-018.1-202X, NENA Changing Role of the Telecommunicator in NG9-1-1 (new standard) – comment due March 15

NFPA

  • BSR/NFPA 1877-202x, Standard on Selection, Care, and Maintenance of Wildland Fire Fighting Clothing and Equipment (new standard) – comment due March 8
  • BSR/NFPA 10-202x, Standard for Portable Fire Extinguishers (revision of ANSI/NFPA 10-2018) – comment due March 8
  • BSR/NFPA 40-202x, Standard for the Storage and Handling of Cellulose Nitrate Film (revision of ANSI/NFPA 40-2019) – comment due March 8
  • BSR/NFPA 72®-202x, National Fire Alarm and Signaling Code® (revision of ANSI/NFPA 72-2019) – comment due March 8
  • BSR/NFPA 105-202x, Standard for Smoke Door Assemblies and Other Opening Protectives (revision of ANSI/NFPA 105-2019) – comment due March 8
  • BSR/NFPA 110-202x, Standard for Emergency and Standby Power Systems (revision of ANSI/NFPA 110-2019) – comment due March 8
  • BSR/NFPA 400-202x, Hazardous Materials Code (revision of ANSI/NFPA 400-2019) – comment due March 8
  • BSR/NFPA 484-202x, Standard for Combustible Metals (revision of ANSI/NFPA 484-2019) – comment due March 8
  • BSR/NFPA 1581-202x, Standard on Fire Department Infection Control Program (revision of ANSI/NFPA 1581-2015) – comment due March 8
  • BSR/NFPA 1582-202x, Standard on Comprehensive Occupational Medical Program for Fire Departments (revision of ANSI/NFPA 1582-2018) – comment due March 8
  • BSR/NFPA 1583-202x, Standard on Health-Related Fitness Programs for Fire Department Members (revision of ANSI/NFPA 1583-2015) – comment due March 8
  • BSR/NFPA 1584-202x, Standard on the Rehabilitation Process for Members during Emergency Operations and Training Exercises (revision of ANSI/NFPA 1584-2015) – comment due March 8
  • BSR/NFPA 1977-202x, Standard on Protective Clothing and Equipment for Wildland Fire Fighting (revision of ANSI/NFPA 1977-2016) – comment due March 8
  • BSR/NFPA 1984-202x, Standard on Respirators for Wildland Fire Fighting Operations (revision of ANSI/NFPA 1984-2011) – comment due March 8
  • BSR/NFPA 12-202x, Standard on Carbon Dioxide Extinguishing Systems (revision of ANSI/NFPA 12-2018) – comment due March 22
  • BSR/NFPA 20-202x, Standard for the Installation of Stationary Pumps for Fire Protection (revision of ANSI/NFPA 20-2019) – comment due March 22
  • BSR/NFPA 80-202x, Standard for Fire Doors and Other Opening Protectives (revision of ANSI/NFPA 80-2019) – comment due March 22
  • BSR/NFPA 241-202x, Standard for Safeguarding Construction, Alteration, and Demolition Operations (revision of ANSI/NFPA 241-2019) – comment due March 22
  • BSR/NFPA 2001-202x, Standard on Clean Agent Fire Extinguishing Systems (revision of ANSI/NFPA 2001-2018) – comment due March 22

NSF

  • BSR/NSF 40-202x (i42r1), Residential Wastewater Treatment Systems (revision of ANSI/NSF 40-2019) – comment due February 28
  • BSR/NSF 49-202x (i159r3), Biosafety Cabinetry: Design, Construction, Performance, and Field Certification (revision of ANSI/NSF 49-2019) – comment due February 28
  • BSR/NSF 55-202x (i53r1), Ultraviolet Microbiological Water Treatment Systems (revision of ANSI/NSF 55-2019) – comment due February 28
  • BSR/NSF 385-202x (i2r1), Disinfection Mechanics (revision of ANSI/NSF 385-2019) – comment due March 7
  • BSR/NSF 4-202x (i31r1), Commercial Cooking, Rethermalization, and Powered Hot Food Holding and Transportation Equipment (revision of ANSI/NSF 4-2019) – comment due March 8
  • BSR/NSF 4-202x (i32r1), Commercial Cooking, Rethermalization, and Powered Hot Food Holding and Transportation Equipment (revision of ANSI/NSF 4-2019) – comment due March 8
  • BSR/NSF 6-202x (i18r1), Dispensing Freezers (revision of ANSI/NSF 6-2018) – comment due March 8
  • BSR/NSF 6-202x (i19r1), Dispensing Freezers (revision of ANSI/NSF 6-2018) – comment due March 8
  • BSR/NSF 7-202x (i24r1), Commercial Refrigerators and Freezers (revision of ANSI/NSF 7-2019) – comment due March 8
  • BSR/NSF 8-202x (i19r1), Commercial Powered Food Preparation Equipment (revision of ANSI/NSF 8-2018) – comment due March 8
  • BSR/NSF 12-202x (i14r1), Automatic Ice Making Equipment (revision of ANSI/NSF 12-2018) – comment due March 8
  • BSR/NSF 18-202x (i19r1), Manual Food and Beverage Dispensing Equipment (revision of ANSI/NSF 18-2016) – comment due March 8
  • BSR/NSF 20-202x (i8r1), Commercial Bulk Milk Dispensing Equipment (revision of ANSI/NSF 20-2020) – comment due March 8
  • BSR/NSF 25-202x (i15r1), Vending Machines for Food and Beverages (revision of ANSI/NSF 25-2017) – comment due March 8
  • BSR/NSF 25-202x (i19r1), Vending Machines for Food and Beverages (revision of ANSI/NSF 25-2017) – comment due March 8
  • BSR/NSF 455-2-202x (i10), Good Manufacturing Practices for Dietary Supplements (revision of ANSI/NSF 455-2-2020) – comment due March 14
  • BSR/NSF 4-202x (i21r7), Commercial Cooking, Rethermalization, and Powered Hot Food Holding and Transportation Equipment (revision of ANSI/NSF 4-2019) – comment due March 21
  • BSR/NSF/CAN 60-202x (i94r1), Drinking Water Treatment Chemicals – Health Effects (revision of ANSI/NSF/CAN 60-2020) – comment due March 21
  • BSR/NSF/CAN 61-202x (i158r1), Drinking Water System Components – Health Effects (revision of ANSI/NSF/CAN 61-2020) – comment due March 21
  • BSR/NSF/CAN 600-202x (i5r1), Health Effects Evaluation and Criteria for Chemicals in Drinking Water (revision of ANSI/NSF/CAN 600-2019) – comment due March 22
  • BSR/NSF 240-202x (i4r1), Drainfield Trench Product Sizing for Gravity Dispersal Onsite Wastewater Treatment and Dispersal Systems (withdrawal of ANSI/NSF 240-2011 (R2017) (i2r1)) – comment due March 29

PDA

  • BSR/PDA Standard 05-202x, Method for Rating 0.1 Mycoplasma Reduction Filters (new standard) – comment due March 1

SAIA

  • BSR/SAIA A92.20-202x, Design, Calculations, Safety Requirements and Test Methods for Mobile Elevating Work Platforms (MEWPs) (revision of ANSI/SAIA A92.20-2020) – comment due February 21
  • BSR/SAIA A92.22-202x, Safe Use of Mobile Elevating Work Platforms (MEWPs) (revision of ANSI/SAIA A92.22-2020) – comment due February 21

SCTE

  • BSR/SCTE 210-202x, Performance Metrics for Energy Efficiency & Functional Density of Cable Data Generation, Storage, Routing, and Transport Equipment (revision of ANSI/SCTE 210-2015) – comment due March 1
  • BSR/SCTE 215-1-1-202xb, HEVC Video Constraints for Cable Television – Part 1-1: HDR (revision of ANSI/SCTE 215-1-1-2020) comment due March 1
  • BSR/SCTE 186-202x, Product Physical, Environmental, Electrical, Sustainability, and Quality Requirements for Cable Telecommunications (revision of ANSI/SCTE 186-2016) – comment due March 29

SPRI

  • BSR/SPRI/FM BPT-1-202x, Test Standard for Comparative Pull-Through Strengths of Insulation Fastening Systems and Substrate Board Materials Used with Low Slope Roofing Systems (new standard) – comment due March 14

TNI

  • Revision of the 2009 TNI Environmental Sector Standard Volume 2 Modules 1 and 3, Consolidated into a Single Module, Volume 2 Module 1 – comment due March 1

UL

  • BSR/UL 62841-2-3-202x, Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery – Safety – Part 2-3: Particular Requirements for Hand-Held Grinders, Disc-Type Polishers and Disc-Type Sanders (identical national adoption of IEC 62841-2-3) – comment due February 21
  • BSR/UL 94-202X, Standard for Safety for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances (revision of ANSI/UL 94-2020) – comment due February 21
  • BSR/UL 268-202x, Standard for Safety for Smoke Detectors for Fire Alarm Systems (revision of ANSI/UL 268-2019) – comment due February 21
  • BSR/UL 486C-202x, Standard for Safety for Splicing Wire Connectors (revision of ANSI/UL 486C-2019) – comment due February 21
  • BSR/UL 486A-486B-202x, Standard for Safety for Wire Connectors (revision of ANSI/UL 486A-486B-2019) – comment due February 21
  • BSR/UL 521-202x, Standard for Safety for Heat Detectors for Fire Protective Signaling Systems (revision of ANSI/UL 521-2020) – comment due February 21
  • BSR/UL 758-202X, Standard for Safety for Appliance Wiring Material (revision of ANSI/UL 758-2020) – comment due February 21
  • BSR/UL 1277-202x, Standard for Safety for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (revision of ANSI/UL 1277-2020) – comment due February 21
  • BSR/UL 1963-202x, Standard for Safety for Refrigerant Recovery/Recycling Equipment (revision of ANSI/UL 1963-2013) – comment due February 21
  • BSR/UL 2703-202x, Standard for Safety for Mounting Systems, Mounting Devices, Clamping/Retention Devices, and Ground Lugs for Use with Flat-Plate Photovoltaic Modules and Panels (revision of ANSI/UL 2703-2019d) – comment due February 21
  • BSR/UL 464A-2016 (R202x), Standard for Safety for Audible Signal Appliances for General Signaling Use (reaffirmation of ANSI/UL 464A-2016) – comment due February 22
  • BSR/UL 1480A-2016 (R202x), Standard for Safety for Speakers for Commercial and Professional Use (reaffirmation of ANSI/UL 1480A-2016) – comment due February 22
  • BSR/UL 857-202x, Standard for Safety for Busways (revision of ANSI/UL 857-2011 (R2016)) – comment due February 22
  • BSR/UL 1370-202X, Standard for Safety for Unvented Alcohol Fuel Burning Decorative Appliances (revision of ANSI/UL 1370-2016) – comment due February 23 (also here)
  • BSR/UL 360-202X, Standard for Liquid-Tight Flexible Metal Conduit (revision of ANSI/UL 360-2020) – comment due February 28
  • BSR/UL 746B-202x, Standard for Safety for Polymeric Materials – Long Term Property Evaluations (revision of ANSI/UL 746B-2020) – comment due February 28
  • BSR/UL 845-202x, Standard for Safety for Motor Control Centers (revision of ANSI/UL 845-2018) – comment due February 28
  • BSR/UL 982-202x, Standard for Safety for Motor-Operated Household Food Preparing Machines (revision of ANSI/UL 982-2020) – comment due February 28
  • BSR/UL 1004-9-202x, Standard for Safety for Form Wound and Medium Voltage Rotating Electrical Machines (revision of ANSI/UL 1004-9-2016) – comment due February 28
  • BSR/UL 1026-202x, Standard for Safety for Electric Household Cooking Appliances (revision of ANSI/UL 1026-2019) – comment due February 28
  • BSR/UL 1574-202x, Standard for Safety for Track Lighting Systems (revision of ANSI/UL 1574-2020) – comment due February 28
  • BSR/UL 244B-202X, Field Installed and/or Field Connected Appliance Controls (new standard) – comment due March 1
  • BSR/UL 61010-2-011-202x, Standard for Safety for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use – Part 011: Particular Requirements for Refrigerating Equipment (national adoption of IEC 61010-2-011 with modifications and revision of ANSI/UL 61010-2-011-2017) – comment due March 7
  • BSR/UL 508A-202x, Standard for Safety for Industrial Control Panels (revision of ANSI/UL 508A-2020) – comment due March 7
  • BSR/UL 746D-202x, Standard for Safety for Polymeric Materials – Fabricated Parts (revision of ANSI/UL 746D-2018) – comment due March 7
  • BSR/UL 1023-202x, Household Burglar-Alarm System Units (revision of ANSI/UL 1023-2017) – comment due March 7
  • BSR/UL 1203-202x, Standard for Safety for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations (revision of ANSI/UL 1203-2020) – comment due March 7
  • BSR/UL 1738-202x, Standard for Safety for Venting Systems for Gas-Burning Appliances, Categories II, III, and IV (revision of ANSI/UL 1738-2014 (R2020)) – comment due March 7
  • BSR/UL 2166-202X, Standard for Halocarbon Clean Agent Extinguishing System Units (revision of ANSI/UL 2166-2020) – comment due March 7
  • BSR/UL 1012-2012 (R202x), Standard for Safety for Power Units Other Than Class 2 (reaffirmation of ANSI/UL 1012-2012 (R2016)) – comment due March 8
  • BSR/UL 1286-202X, Standard for Safety for Office Furnishings (revision of ANSI/UL 1286-2018) – comment due March 8
  • BSR/UL 125-202x, Standard for Safety for Flow Control Valves for Anhydrous Ammonia and LP-Gas (revision of ANSI/UL 125-2020) – comment due March 9
  • BSR/UL 144-202x, Standard for Safety for LP-Gas Regulators (revision of ANSI/UL 144-2019) – comment due March 9
  • BSR/UL 180-202x, Standard for Safety for Combustible Liquid Tank Accessories (revision of ANSI/UL 180-2019) – comment due March 9
  • BSR/UL 842-202x, Standard for Safety for Valves for Flammable and Combustible Liquids (revision of ANSI/UL 842-2020) – comment due March 9
  • BSR/UL 508A-202x, Standard for Safety for Industrial Control Panels (revision of ANSI/UL 508A-2020) – comment due March 14
  • BSR/UL 2367-202X, Standard for Safety for Solid State Overcurrent Protectors (revision of ANSI/UL 2367-2009 (R2018)) – comment due March 14
  • BSR/UL 6703-202x, Standard for Safety for Connectors for Use in Photovoltaic Systems (revision of ANSI/UL 6703-2020) – comment due March 14
  • BSR/UL 60079-33-202x, Standard for Safety for Explosive Atmospheres – Part 33: Equipment Protection by Special Protection s (national adoption with modifications of IEC 60079-33) – comment due March 15
  • BSR/UL 1691-202x, Standard for Safety for Single-Pole Locking-Type Separable Connectors (revision of ANSI/UL 1691-2018) – comment due March 15
  • BSR/UL 2238-202X, Standard for Cable Assemblies and Fittings for Industrial Control and Signal Distribution (revision of ANSI/UL 2238-2020) – comment due March 15
  • BSR/UL 2703-202x, Standard for Safety for Mounting Systems, Mounting Devices, Clamping/Retention Devices, and Ground Lugs for Use with Flat-Plate Photovoltaic Modules and Panels (revision of ANSI/UL 2703-2019) – comment due March 21
  • BSR/UL 73-202x, Standard for Safety for Motor-Operated Appliances (revision of ANSI/UL 73-2020) – comment due March 22
  • BSR/UL 283-202x, Standard for Safety for Air Fresheners and Deodorizers (revision of ANSI/UL 283-2016) – comment due March 22
  • BSR/UL 430-202x, Standard for Safety for Waste Disposers (revision of ANSI/UL 430-2018) – comment due March 22
  • BSR/UL 1240-202x, Standard for Safety for Electric Commercial Clothes-Drying Equipment (revision of ANSI/UL 1240-2019) – comment due March 22
  • BSR/UL 5085-2-202x, Standard for Safety for Low Voltage Transformers (revision of ANSI/UL 5085-2-2012 (R2017)) – comment due March 23
  • CAN/ULC-S679, Standard for Metallic and Nonmetallic Underground Piping for Flammable and Combustible Liquids – comment due March 25
  • CAN/ULC-S138, Standard Method of Test for Fire Growth of Insulated Building Panels in a Full-Scale Room Configuration – comment due March 29
  • CAN/ULC-S593, Standard for the Servicing of Halon and Clean Agent Extinguishing Systems – comment due March 29
  • CAN/ULC-S594, Standard for the Servicing of Restaurant Cooking Extinguishing Systems – comment due March 29
  • BSR/UL 3100-202x, Standard for Safety for Automated Mobile Platforms (AMPs) (new standard) – comment due March 29
  • BSR/UL 10C-2016 (R202x), Standard for Positive Pressure Fire Tests of Door Assemblies (reaffirmation of ANSI/UL 10C-2016) – comment due March 29
  • BSR/UL 60947-7-1-2017 (R202x), Standard for Safety for Low-Voltage Switchgear and Controlgear – Part 7-1: Ancillary Equipment – Terminal Blocks for Copper Conductors (reaffirmation of ANSI/UL 60947-7-1-2017) – comment due March 29
  • BSR/UL 60947-7-2-2017 (R202x), Standard for Safety for Low-Voltage Switchgear and Controlgear – Part 7-2: Ancillary Equipment – Protective Conductor Terminal Blocks for Copper Conductors (reaffirmation of ANSI/UL 60947-7-2-2017) – comment due March 29
  • BSR/UL 60947-7-3-2017 (R202x), Standard for Safety for Low-Voltage Switchgear and Controlgear – Part 7-3: Ancillary Equipment – Safety Requirements for Fuse Terminal Blocks (reaffirmation of ANSI/UL 60947-7-3-2017) – comment due March 29
  • BSR/UL 1191-202X, Standard for Components for Personal Flotation Devices (revision of ANSI/UL 1191-2019) – comment due March 29
  • BSR/UL 62986-202x, Standard for Safety for Plugs, Socket-Outlets and Couplers with Arcuate Contacts (national adoption with modifications of IEC 62986) – comment due March 30
  • BSR/UL 1275-202x, Standard for Safety for Flammable Liquid Storage Cabinets (revision of ANSI/UL 1275-2010 (R2014)) – comment due March 30
  • ANSI/CAN/UL/ULC 1275, Standard for Safety for Flammable Liquid Storage Cabinets – comment due March 30
  • CAN/ULC S515, Standard for Automobile Fire Fighting Apparatus – comment due March 30
  • ANSI/CAN/UL/ULC 33, Standard for Heat Responsive Links for Fire Protection Service – comment due March 30
  • ANSI/CAN/UL/ULC 199, Standard for Automatic Sprinklers for Fire-Protection Service – comment due March 30
  • BSR/UL 291-2012 (R202x), Standard for Safety for Automated Teller Systems (reaffirmation of ANSI/UL 291-2012 (R2016)) – comment due April 5
  • BSR/UL 33-202X, Standard for Heat Responsive Links for Fire-Protection Service (revision of ANSI/UL 33-2010 (R2020)) – comment due April 6
  • BSR/UL 199-202X, Standard for Automatic Sprinklers for Fire-Protection Service (revision of ANSI/UL 199-2020) – comment due April 6

VC

  • BSR Z80.36-202x, Light Hazard Protection for Ophthalmic Instruments (revision of ANSI Z80.36-2016) – comment due March 15

VITA

  • BSR/VITA 68.2-202x, VPX Standard S-Parameter Definition (new standard) – comment due March 22
  • BSR/VITA 66.4-2016 (R202x), Optical Interconnect on VPX – Half Width MT Variant (reaffirmation of ANSI/VITA 66.4-2016) – comment due March 22
  • BSR/VITA 76-2016 (R202x), High Performance Cable Standard – Ruggedized 10 Gbaud Bulkhead Connector for Cu and AOC Cables (reaffirmation of ANSI/VITA 76-2016) – comment due March 22

2 Responses

Add a Comment

You must be logged in to post a comment