The following list of standards posted for public comment are drawn from the ANSI Standards Action Bulletin, Standards Development Organization (SDO) websites, and/or submitted to Women in Standards by the publishing SDO. Standards posted for public comment provides an opportunity for those not involved in the drafting of the standard to share their thoughts, ideas, concerns, and proposed solutions regarding the draft standard.

The Women in Standards SDO Directory includes information on joining an SDO’s standards development committee(s) and submitting public comment, or visit the Standards Action page or SDO website for additional information and to submit comment. (To submit a standard for inclusion in the below list, email admin@womeninstandards.org)

TIP: For guidance on crafting a strong public comment, click here!

AAFS, AAMI, AARST, AGMA, AISC, AISI, ALI, AMCA, ANS, API, ASA, ASABE, ASB, ASHRAE, ASME, ASSP, ASTM, ATIS, AWWA, AWS, BHMA, camts, CSA, CTA, ESTA, FCI, GBI, GISC, HI, HIBCC, HL7, Home Innovation, HPS, IAPMO, IEEE, IIAR, IICRC, ICC, IEC, INMM, ISEA, ISO, ITSDF, NCPDP, NEMA, NFPA, NISO, NSF, PLASTICS, RIA, RESNA, SCTE, SPRI, UL, VITA, WDMA

AAFS

  • BSR/ASB Std 076-202x, Standard for Training and Certification of Canine Detection of Human Remains: Human Remains on Land (new standard) – comment due October 26, 2020
  • BSR/ASB Std 130-202x, Standard for Training in Forensic DNA Amplification Methods for Subsequent Capillary Electrophoresis Sequencing (new standard) – comment due October 26, 2020
  • BSR/ASB Std 131-202x, Standard for Training in Forensic DNA Sequencing using Capillary Electrophoresis (new standard) – comment due October 26, 2020
  • BSR/ASB Std 140-202x, Standard for Training in Forensic Human Mitochondrial DNA Analysis, Interpretation, Statistical Evaluation, and Reporting (new standard) – comment due October 26, 2020
  • BSR/AAFS ASB Std 137-202x, Standard for Examination and Documentation of Footwear and Tire Impression Evidence (new standard) – comment due November 2, 2020
  • BSR/ASB BPR 050-202x, Best Practice Recommendation for Photographic Documentation of Footwear and Tire Impression Evidence (new standard) – comment due November 2, 2020
  • BSR/ASB Std 125-202x, Organizational and Foundational Standard for Medicolegal Death Investigation (new standard) – comment due November 2, 2020
  • BSR/ASB BPR 114-202x, Best Practice Recommendations for Internal Validation of Software Used in Forensic DNA Laboratories (new standard) – comment due November 23
  • BSR/ASB Std 027-202x, Standard for Training and Certification of Canine Detection of Humans: Patrol Canine Team (new standard) – comment due November 30
  • BSR/ASB Std 132-202x, Standard for Population Affinity Estimation in Forensic Anthropology (new standard) – comment due December 7

AAMI

  • BSR/AAMI PC76-202x, Active implantable medical devices – Requirements and test protocols for safety of patients with pacemakers and ICDs exposed to magnetic resonance imaging (new standard) – comment due November 2
  • BSR/AAMI HIT1000-1-202x, Health IT Software and Systems – Part 1: Fundamental concepts and principles (new standard) – comment due November 9
  • BSR/AAMI/IEC 60601-2-20-202x, Medical electrical equipment – Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators (identical national adoption of IEC 60601-2-20:2020 and revision of ANSI/AAMI/IEC 60601-2-20-2009 (R2014)) – comment due November 23

AARST

  • BSR/AARST RMS-LB-202x, Radon Mitigation Standards for Schools and Large Buildings (revision of ANSI/AARST RMS-LB-2018) – comment due October 26
  • BSR/AARST RMS-MF-202x, Radon Mitigation Standards for Multifamily Buildings (revision of ANSI/AARST RMS-MF-2018) – comment due October 26
  • BSR/AARST SGM-SF-202x, Soil Gas Mitigation Standards in Existing Homes (revision of ANSI/AARST SGM-SF-2017) – comment due October 26
  • BSR/AARST RMS-LB-202x, Radon Mitigation Standards for Schools and Large Buildings (revision of ANSI/AARST RMS-LB-2018) – comment due November 8, 2020
  • BSR/AARST RMS-MF-202x, Radon Mitigation Standards for Multifamily Buildings (revision of ANSI/AARST RMS-MF-2018) – comment due November 8, 2020
  • BSR/AARST SGM-SF-202x, Soil Gas Mitigation Standards in Existing Homes (revision of ANSI/AARST SGM-SF-2017) – comment due November 8, 2020
  • BSR/AARST MALB-202x, Protocol for Conducting Measurements of Radon and Radon Decay Products In Schools and Large Buildings (revision of ANSI/AARST MALB-2014) – comment due November 9
  • BSR/AARST MAMF-202x, Protocol for Conducting Measurements of Radon and Radon Decay Products in Multifamily Buildings (revision of ANSI/AARST MAMF-2017) – comment due November 9

AGMA

  • BSR/AGMA ISO 6336-6-BXX-202x, Calculation of load capacity of spur and helical gears – Part 6: Calculation of service life under variable load (identical national adoption of ISO 6336-6:2019) – comment due October 26

AISC

AISI

  • BSR/AISI S915-202x, Test Standard for Determining the Strength and Deformation Behavior of Through-the-Web Punchout Cold-Formed Steel Wall Stud Bridging Connectors (revision of ANSI/AISI S915-2015) – comment due December 7
  • BSR/AISI S916-202x, Test Standard for Determining the Strength and Stiffness of Cold-Formed Steel-Framed Nonstructural Interior Partition Walls Sheathed with Gypsum Board (revision of ANSI/AISI S916-2015) – comment due December 7

AMCA

ANS

API

API allows public commenting through their online portal found here. Instructions on submitting a comment can be found here. A short list of standards posted for comment are provided below.

  • RP 571 Version 5 Safe Operation of Hydrofluoric Acid Alkylation Units
  • API RP 65-3, 1st Edition
  • API Standard 617, Axial and Centrifugal Compressors and Expander-compressors, 9th ed. 
  • API RP 572 5th Ed Inspection Practices for Pressure
  • API Publication 590 SCIMI Term, Definition, and Acronym Standardization Work Process
  • RP581 4th Ed – PRD In-service vs Inspection Date
  • RP581 4th Ed – Maximum Safety Risk
  • RP581 4th Ed – 581 Part 4 Inspection Planning
  • RP581 4th Ed – Internal Liner Thinning Damage
  • RP 581 4th Ed – Sulfidation Naphthenic Acid
  • WI 4243–MTR Transfer, Tracking and Traceability
  • API RP 576 Inspection of Pressure-relieving Devices 
  • API Standard 616, Gas Turbines for the Petroleum, Chemical, and Gas Industry Services, 6t
  • 620-2051 Define Lowest One Day Mean Temperature Data (LODMAT) for API 620 Tanks
  • API Standard 611, General-purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services
  • TR 655 Volatile Corrosion Inhibitors
  • API_1604 Closure of Underground Petroleum Storage Tanks

ASA

  • BSR/ASA S3.2-202x, Method for Measuring the Intelligibility of Speech over Communication Systems (revision of ANSI/ASA S3.2-2009 (R2020)) – comment due November 9

ASABE

  • BSR/ASAE S331.7 MONYEAR-202x, Implement Power Take-Off Drive Shaft Specifications (revision and redesignation of ANSI/ASAE S331.6-2015) – comment due October 26
  • BSR/ASABE S618 DEC2010 (R202x), Post Frame Building System Nomenclature (reaffirmation and redesignation of ANSI/ASABE S618 DEC2010 (R2016)) – comment due November 23
  • BSR/ASABE S276.8-APR2016 (R202x), Slow-Moving Vehicle Identification Emblem (SMV Emblem) (reaffirmation of ANSI/ASABE S276.8-2016) – comment due November 30
  • BSR/ASABE S600-2011 (R202x), Manually Handled Collapsible Reusable Plastic Containers for Handling of Fruits and Vegetables (reaffirmation of ANSI/ASABE S600-2011 (R2016)) – comment due November 30
  • BSR/ASABE/ISO 3776-2-FEB2016 (R202x), Tractors and machinery for agriculture – Seat belts – Part 2: Anchorage strength requirements (reaffirmation of ANSI/ASABE/ISO 3776-2-2016) – comment due November 30
  • BSR/ASABE/ISO 5007:2003 MAY2006 (R202x), Agricultural wheeled tractors – Operators seat – Laboratory measurement of transmitted vibration (reaffirmation of ANSI/ASABE/ISO 5007:2003 MAY2006 (R2016)) – comment due November 30
  • BSR/ASABE/ISO 5008-2002 W/Cor. 1 MAY2006 (R202x), Agricultural wheeled tractors and field machinery – Measurement of whole-body vibration of the operator (reaffirmation of ANSI/ASABE/ISO 5008-2002 W/Cor. 1 MAY2006 (R2015)) – comment due November 30
  • BSR/ASAE S483.2 AUG2011 (R202x), Rotary Mower Blade Ductility Test (reaffirmation of ANSI/ASAE S483.2 AUG2011 (R2016)) – comment due November 30
  • BSR/ASAE S396.3 JUN2016 (R202x), Combine Capacity and Performance Test Procedure (revision and redesignation of ANSI/ASAE S396.3-JUN2016) – comment due November 30

ASB

  • BSR/ASB Z50.2-2015 (R202x), Bakery Equipment – Sanitation Standards (reaffirmation of ANSI/ASB Z50.2-2015) – comment due October 26

ASHRAE

  • BSR/ASHRAE Standard 219-202x, Method of Testing the Ability of Liquid Line Filter Driers or Adsorbents to Remove Organic Acid (new standard) – comment due November 2
  • BSR/ASHRAE Addendum ca to BSR/ASHRAE Standard 135-202x, BACnet – A Data Communication Protocol for Building Automation and Control Networks (addenda to ANSI/ASHRAE Standard 135-2016) – comment due November 9
  • 1st Public Review of ASHRAE Guideline 1.1-2007R, HVAC&R Technical Requirements for the Commissioning Process – comment due November 9
  • 1st Publication Public Review of BSR/ASHRAE/ASHE Addendum r to ANSI/ASHRAE/ASHE Standard 170-2017, Ventilation of Health Care Facilities – comment due November 15
  • BSR/ASHRAE/ASHE Addendum b to BSR/ASHRAE/ASHE Standard 189.3-202x, Design, Construction, and Operation of Sustainable High-Performance Health Care Facilities (addenda to ANSI/ASHRAE/ASHE Standard 189.3-2017) – comment due November 15
  • 2nd Publication Public Review of BSR/ASHRAE Standard 15.2P, Safety Standard for Refrigeration Systems in Residential Applications – comment due November 16
  • 2nd ISC Public Review of BSR/ASHRAE Addendum ca to ANSI/ASHRAE Standard 135-2016, BACnet – A Data Communication Protocol for Building Automation and Control Networks – comment due November 16
  • BSR/ASHRAE Addendum b to Standard 30-202x, Method of Testing Liquid Chillers (addenda to ANSI/ASHRAE Standard 30-2019) – comment due November 23
  • BSR/ASHRAE Standard 105-202x, Standard Methods for Determining, Expressing, and Comparing Building Energy Performance and Greenhouse Gas Emissions (revision of ANSI/ASHRAE Standard 105-2014) – comment due November 30

ASME

  • BSR/ASME B18.8.2-202x, Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins (Inch Series) (revision of ANSI/ASME B18.8.2-2020) – comment due October 25
  • BSR/ASME B18.8.2-202x, Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins (Inch Series) (revision of ANSI/ASME B18.8.2-2020) – comment due October 25
  • BSR/ASME BPVC Section IX-202x, Welding, Brazing and Fusing Qualifications (revision of ANSI/ASME BPVC Section IX-2019) – comment due October 26
  • BSR/ASME BTH-1-202x, Design of Below-the-Hook Lifting Devices (revision of ANSI/ASME BTH-1-2017) – comment due November 2
  • BSR/ASME PTC 47-202x, Performance Test Code for Integrated Gasification Combined Cycle Power Generation Plants (revision of ANSI/ASME PTC 47-2006 (R2011)) – comment due November 3
  • BSR/ASME B29.28-2015 (R202x), High-Strength Chains for Power Transmission and Tension Linkages (reaffirmation of ANSI/ASME B29.28-2015) – comment due November 24
  • BSR/ASME B29.300-2015 (R202x), Agricultural, Detachable, and Pintle Chains, Attachments, and Sprockets (reaffirmation of ANSI/ASME B29.300-2015) – comment due November 24
  • BSR/ASME CSD-1-202x, Controls and Safety Devices for Automatically Fired Boilers (revision of ANSI/ASME CSD-1-2018) – comment due December 7
  • BSR/ASME/ANS RA-S-1.4-202x, Probabilistic Risk Assessment Standard for Advanced Non-Light Water Reactor Nuclear Power Plants (new standard) – comment due December 15

ASSP

  • BSR/ASSP Z359.11-202X, Safety Requirements for Full Body Harnesses (revision and redesignation of ANSI/ASSE Z359.11-2014) – comment due October 26
  • BSR/ASSP A10.3-202x, Safety Requirements for Powder-Actuated Fastening Systems (revision and redesignation of ANSI/ASSE A10.3-2013) – comment due November 9

ASTM

  • BSR/ASTM WK64558-202x, Guide for Evaluating Water Miscible Metalworking Fluid Foaming Tendency (new standard) – comment due November 23
  • BSR/ASTM D2239-2017 (R202x), Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter (reaffirmation of ANSI/ASTM D2239-2017) – comment due November 23
  • BSR/ASTM D2464-2017 (R202x), Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 (reaffirmation of ANSI/ASTM D2464-2017) – comment due November 23
  • BSR/ASTM D2737-2017 (R202x), Specification for Polyethylene (PE) Plastic Tubing (reaffirmation of ANSI/ASTM D2737-2017) – comment due November 23
  • BSR/ASTM F1498-2018 (R202x), Specification for Taper Pipe Threads 60 for Thermoplastic Pipe and Fittings (reaffirmation of ANSI/ASTM F1498-2018) – comment due November 23
  • BSR/ASTM D2683-202x, Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing (revision of ANSI/ASTM D2683-2017) – comment due November 23
  • BSR/ASTM D3035-202x, Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter (revision of ANSI/ASTM D3035-2017) – comment due November 23
  • BSR/ASTM D3212-202x, Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals (revision of ANSI/ASTM D3212-2017 (R2020)) – comment due November 23
  • BSR/ASTM E601-202x, Guide for Measuring Electromotive Force (EMF) Stability of Base-Metal Thermoelement Materials with Time in Air (revision of ANSI/ASTM E601-2017) – comment due November 23
  • BSR/ASTM E1159-202x, Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum (revision of ANSI/ASTM E1159-2017) – comment due November 23
  • BSR/ASTM E1751-202x, Guide for Temperature Electromotive Force (EMF) Tables for Non-Letter Designated Thermocouple Combinations (revision of ANSI/ASTM E1751-2017) – comment due November 23
  • BSR/ASTM F714-202x, Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter (revision of ANSI/ASTM F714-2018 (R2019)) – comment due November 23
  • BSR/ASTM F876-202x, Specification for Crosslinked Polyethylene (PEX) Tubing (revision of ANSI/ASTM F876-2020) – comment due November 23
  • BSR/ASTM F1733-202x, Specification for Butt Heat Fusion Polyamide (PA) Plastic Fitting for Polyamide (PA) Plastic Pipe and Tubing (revision of ANSI/ASTM F1733-2018) – comment due November 23
  • BSR/ASTM F1960-202x, Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-Linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing (revision of ANSI/ASTM F1960-2019) – comment due November 23
  • BSR/ASTM F2159-202x, Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing (revision of ANSI/ASTM F2159-2019) – comment due November 23
  • BSR/ASTM F2620-202x, Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings (revision of ANSI/ASTM F2620-2019) – comment due November 23
  • BSR/ASTM F2735-202x, Specification for Plastic Insert Fittings for SDR9 Cross-Linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing (revision of ANSI/ASTM F2735-2018) – comment due November 23
  • BSR/ASTM F2854-202x, Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing (revision of ANSI/ASTM F2854-2016) – comment due November 23
  • BSR/ASTM F3348-202x, Specification for Plastic Press Insert Fittings with Factory-Assembled Stainless Steel Press Sleeve for SDR9 Cross-Linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing (revision of ANSI/ASTM F3348-2020A) – comment due November 23

ATIS

AWS

  • BSR/AWS B4.0, AMD1-202x, Standard Methods for Mechanical Testing of Welds (addenda to ANSI/AWS B4.0-2016) – comment due November 23
  • BSR/AWS C6.2/C6.2M-202x, Specification for Rotary Friction Welding (revision of ANSI/AWS C6.2/C6.2M-2006) – comment due November 23
  • BSR/AWS C6.3M/C6.3-202x, Recommended Practice for Friction Stir Welding (new standard) – comment due November 30

AWWA

  • BSR/AWWA C214-202x, Machine-Applied Polyolefin Tape Coatings for Steel Water Pipe (revision of ANSI/AWWA C214-2013) – comment due November 2
  • BSR/AWWA C605-202x, Underground Installation of Polyvinyl Chloride (PVC) and Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe and Fittings (revision of ANSI/AWWA C605-2013) – comment due November 2
  • BSR/AWWA J100-202x, Risk and Resilience Management of Water and Wastewater Systems (revision of ANSI/AWWA J100-2010 (R2013)) – comment due November 30

BHMA

  • BSR/BHMA A156.3-202x, Standard for Exit Devices (revision of ANSI/BHMA A156.3-2014) – comment due October 26
  • BSR/BHMA A156.9-202x, Standard for Cabinet Hardware (revision of ANSI/BHMA A156.9-2015) – comment due October 26
  • BSR/BHMA A156.18-202x, Standard for Materials and Finishes (revision of ANSI/BHMA A156.18-2016) – comment due October 26
  • BSR/BHMA A156.36-202x, Standard for Auxiliary Locks (revision of ANSI/BHMA A156.36-2016) – comment due October 26
  • BSR/BHMA A156.39-202x, Standard for Residential Locksets and Latches (revision of ANSI/BHMA A156.39-2015) – comment due October 26
  • BSR/BHMA A156.40-202x, Standard for Residential Deadbolts (revision of ANSI/BHMA A156.40-2015) – comment due October 26

camts

CSA

  • BSR/CSA NGV 4.7-202x, Automatically pressure operated valves for natural gas dispensing systems (new standard) – comment due November 24
  • BSR/CSA HGV 2-202x, Compressed hydrogen gas vehicle fuel containers (revision of ANSI/CSA HGV 2-2014 (R2019)) – comment due December 7

CTA

  • BSR/CTA 2048-A-202x, Host and Router Profiles for IPv6 (revision and redesignation of ANSI/CTA 2048-2014) – comment due October 26
  • BSR/CTA 2084-202x, Test Methods for Determining A/V Products Energy Efficiency (new standard) – comment due November 30
  • BSR/CTA 2088-202x, Baseline Cybersecurity Standard for Devices and Device Systems (new standard) – comment due November 30
  • BSR/CTA 2049-A-202x, Determination of Small Network Equipment – Average Energy Consumption (revision and redesignation of ANSI/CTA 2049-2015) – comment due December 7

ESTA

FCI

  • BSR/FCI 99-2-202x, Standard for Pressure Reducing Regulator Capacity (revision of ANSI/FCI 99-2-2015) – comment due October 26
  • BSR/FCI 19-1-202x, Standard for Sizing & Selection of Type 2 Secondary Pressure Drainers (new standard) – comment due December 7
  • BSR/FCI 79-1-202x, Standard for Proof of Pressure Ratings for Pressure Regulators and Temperature Regulators (revision of ANSI/FCI 79-1-2016) – comment due December 7

GBI

  • BSR/GBI 01-202X, Green Globes Assessment Protocol for Commercial Buildings (revision of ANSI/GBI 01-2019) – comment due November 2

HI

  • BSR/HI 9.6.7-202x, Rotodynamic Pumps – Guideline for Effects of Liquid Viscosity on Performance (revision of ANSI/HI 9.6.7-2015) – comment due November 2
  • BSR/HI 9.1-9.5-202x, Pumps – General Guidelines (revision of ANSI/HI 9.1-9.5-2015) – comment due November 9

HIBCC

  • BSR/HIBC PAS 1.4-202x, The Health Industry Bar Code (HIBC) Provider Applications Standard PAS 1.4 (new standard) – comment due November 23

HL7

  • BSR/HL7 CQLANG, R1-202x, HL7 Cross-Paradigm Specification: Clinical Quality Language, Release 1 (new standard) – comment due November 30

Home Innovation

  • BSR Z765-202x, Square Footage – Method for Calculating (revision of ANSI Z765-2003 (R2013)) – comment due November 8

HPS

  • BSR N43.2-202x, Radiation Safety for X-Ray Diffraction and Fluorescence Analysis Equipment (revision of ANSI N43.2-2001 (R2010)) – comment due November 9

IAPMO

  • BSR/IAPMO USHGC 1-202x, Uniform Solar, Hydronics & Geothermal Code (revision of ANSI/IAPMO USHGC 1-2018) – comment due October 26
  • BSR/IAPMO USPSHTC 1-202x, Uniform Swimming Pool, Spa & Hot Tub Code (revision of ANSI/IAPMO USPSHTC 1-2018) – comment due October 26
  • BSR/IAPMO Z1002-202X, Rainwater Harvesting Tanks (revision of ANSI/IAPMO Z1002-2014) – comment due October 26
  • BSR/ASSE 1003-202x, Performance Requirements for Water Pressure Reducing Valves for Potable Water Distribution Systems (new standard) – comment due November 23

ICC

  • BSR/ASABE/ICC 802-202x, Landscape Irrigation Sprinkler and Emitter Standard (revision of ASABE/ICC 802-2014) – comment due November 2
  • BSR/ICC 600-202x, Standard for Residential Construction in High-Wind Regions (revision of ANSI/ICC 600-2013) – comment due November 2
  • BSR/ICC 900-202x, Standard for Solar Water Heating Systems (revision and redesignation of ANSI/ICC 900/SRCC 300-2015) – comment due November 22

IEC

All commenting is via IEC’s free online platform here.

  • IEC 60974-1 ED6: Arc welding equipment – Part 1: Welding power sources – comment due November 13
  • IEC 62657-3 ED1: Industrial communication networks – Wireless communication networks – Formal description of the automated coexistence management and application guidance – comment due November 13
  • IEC 62657-2 ED3: Industrial communication networks – Wireless communication networks – Part 2: Coexistence management – comment due November 13
  • IEC 61851-23-1 ED1: Electric vehicle conductive charging system – Part 23-1: DC electric vehicle charging station with an automated connection device – comment due November 13
  • IEC 61097-2 ED4: Global maritime distress and safety system (GMDSS) – Part 2: COSPAS-SARSAT EPIRB – Satellite emergency position indicating radio beacon operating on 406 MHz – Operational and performance requirements, methods of testing and required test results – comment due November 13
  • CISPR 16-1-4/AMD2 ED4: Amendment 2 – Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-4: Radio disturbance and immunity measuring apparatus – Antennas and test sites for radiated disturbance measurements – comment due November 13
  • IEC 60038/AMD1/FRAG2 ED7: Amendment 1 (f2) – Standard voltages for AC supply and AC equipment (Proposed horizontal standard) – comment due November 20
  • IEC 60038/AMD1/FRAG3 ED7: Amendment 1 (f3) – Standard voltages for DC and AC traction systems (Proposed horizontal standard) – comment due November 20
  • IEC 61914 ED3: Cable cleats for electrical installations – comment due November 20
  • IEC 60884-1/FRAG2 ED4: Plugs and socket-outlets for household and similar purposes – Part 1: General requirements – comment due November 20
  • IEC 60728-115 ED1: In-Building Optical systems for broadcast signal transmissions (TA 5) – comment due November 20
  • IEC 63042-102 ED1: UHV AC transmission systems – General system design – comment due November 20
  • IEC 60757 ED2: Code for designation of colours – comment due November 27
  • IEC 60938-1 ED3: Fixed inductors for electromagnetic interference suppression – Part 1: Generic specification – comment due November 27
  • IEC 62047-41 ED1: Semiconductor devices – Micro-electromechanical devices – Part 41: RF MEMS Circulators and Isolators – comment due November 27
  • IEC 61970-452 ED4: Energy management system application program interface (EMS-API) – Part 452: CIM static transmission network model profiles – comment due November 27
  • IEC 62314 ED2: Solid-state relays – comment due November 27
  • IEC 60086-5 ED5: Primary batteries – Part 5: Safety of batteries with aqueous electrolyte – comment due December 4
  • IEC 60938-2 ED3: Fixed inductors for electromagnetic interference suppression – Part 2: Sectional specification on Power Line Chokes – comment due December 4
  • IEC 63249-1 ED1: Waveguide to coaxial adapters –Part 1: Generic specification – General requirements and test methods – comment due December 4
  • IEC 61970-401 ED1: Energy management system application program interface (EMS-API) – Part 401: Profile framework – comment due December 4
  • ISO 80601-2-90 ED1: Medical electrical equipment —Part 2-90: Particular requirements for basic safety and essential performance of respiratory high-flow therapy equipment – comment due December 4
  • IEC 63173-1 ED1: Maritime navigation and radiocommunication equipment and systems – Data Interface – Part 1: S-421 Route Plan Based on S-100 – comment due December 4
  • IEC 60794-1-219 ED1: Optical fibre cables – Part 1-219: Generic specification – Basic optical cable test procedures – Material compatibility test, Method F19 – comment due December 4
  • IEC 60794-1-401 ED1: Optical fibre cables – Basic optical cable test procedures – Part 401: Electrical test methods – Short-circuit test (for OPGW, OPPC and OPAC), Method H1 – comment due December 4
  • IEC 60794-1-402 ED1: Optical Fibre Cables – Basic optical cable test procedures – Part 402: Electrical test methods – Lightning test (for OPGW, OPPC and OPAC), Method H2 – comment due December 4
  • IEC 63087-1 ED1: Measurement method for assistive listening functionality (TA 16) – comment due December 4
  • IEC 60050-871/AMD1 ED1: Amendment 1 – International Electrotechnical Vocabulary (IEV) – Part 871: Active assisted living (AAL) – comment due December 11
  • IEC 61724-1 ED2: Photovoltaic system performance – Part 1: Monitoring – comment due December 11
  • IEC 61760-2 ED3: Surface mounting technology – Part 2: Transportation and storage conditions of surface mounting devices (SMD) – Application guide – comment due December 11
  • IEC 62271-1/AMD1 ED2: Amendment 1 – High-voltage switchgear and controlgear – Part 1: Common specifications for alternating current switchgear and controlgear – comment due December 18
  • IEC 60519-6 ED4: Safety in installations for electroheating and electromagnetic processing – Part 6: Particular requirements for high frequency dielectric and microwave heating and processing equipment – comment due December 18
  • IEC 60384-24 ED3: Fixed capacitors for use in electronic equipment – Part 24: Sectional specification – Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte – comment due December 18
  • IEC 60384-25 ED3: Fixed capacitors for use in electronic equipment – Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte – comment due December 18
  • IEC 62153-4-5 ED2: Metallic cables and other passive components test methods – Part 4-5: Electromagnetic compatibility (EMC) – Coupling or screening attenuation – Absorbing clamp method – comment due December 18
  • IEC 60749-37 ED2: Semiconductor devices – Mechanical and climatic test methods – Part 37: Board level drop test method using an accelerometer – comment due December 18
  • IEC 60749-39 ED2: Semiconductor devices – Mechanical and climatic test methods – Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components – comment due December 18
  • IEC 63244-1 ED1: Semiconductor devices – Semiconductor devices for wireless power transfer and charging – Part 1 : General requirements and specifications – comment due December 18

IEEE

  • BSR C63.24-202x, Standard Recommended Practice for in Situ RF Immunity Evaluation of Electronic Devices and Systems (new standard) – comment due December 22

IIAR

  • BSR/IIAR 4-202x, Installation of Closed-Circuit Ammonia Refrigeration Systems (revision of ANSI/IIAR 4-2015) – comment due October 25
  • BSR/IIAR 8-202X, Decommissioning of Closed-Circuit Ammonia Refrigeration Systems (revision of ANSI/IIAR 8-2015) – comment due October 25
  • BSR/IIAR 4-202x, Installation of Closed-Circuit Ammonia Refrigeration Systems (revision of ANSI/IIAR 4-2015) – comment due October 25
  • BSR/IIAR 8-202X, Decommissioning of Closed-Circuit Ammonia Refrigeration Systems (revision of ANSI/IIAR 8-2015) – comment due October 25
  • BSR/IIAR 2-202x, Standard for the Design of Safe Closed-Circuit Ammonia Refrigeration Systems (revision, redesignation and consolidation of ANSI/IIAR 2-2014, ANSI/IIAR 2-2014 Addendum A-2019) – comment due October 26

IICRC

  • BSR/IICRC S220-202x, Standard for Professional Inspection of Hard Surface Floor Coverings (new standard) – comment due November 15
  • BSR/IICRC S100-202X, Standard for Professional Cleaning of Textile Floor Coverings (revision of ANSI/IICRC S100-2015) – comment due November 30

INMM

  • BSR N14.7-202x, Guidance for Packaging Type A Quantities of Radioactive Materials (revision of ANSI N14.7-2013) – comment due November 30
  • BSR N15.36-202x, Standard for Methods of Nuclear Material Control – Measurement Control Program – Nondestructive Assay (revision of ANSI N15.36-2010) – comment due November 30

ISO

(note: ISO has over 300 standards open for public comment, we’ve included a selection of these in this list. To comment on a standard, contact your national member. For full listing, click here.)

  • ISO/DIS 23407 Protective gloves against thermal risks (heat and/or fire)
  • ISO 15501-1:2016/DAMD 1 Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements — Amendment 1
  • ISO/DIS 8765 Hexagon head bolts with metric fine pitch thread — Product grades A and B
  • ISO/IEC DIS 9797-2 Information security — Message authentication codes (MACs) — Part 2: Mechanisms using a dedicated hash-function
  • ISO/DIS 45003 Occupational health and safety management — Psychological health and safety at work : managing psychosocial risks — Guidelines
  • ISO/IEC/IEEE DIS 29119-4 Software and systems engineering — Software testing — Part 4: Test techniques
  • ISO/DIS 21806-14 Road vehicles — Media Oriented Systems Transport (MOST) — Part 14: Lean application layer
  • ISO/DIS 21219-10 Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 10: Conditional access information (TPEG2-CAI)
  • ISO/DIS 24252 Biogas systems — Non-household and non-gasification
  • ISO/DIS 771 Oilseed meals — Determination of moisture and volatile matter content
  • ISO/DIS 22958 Textiles — Water resistance — Rain tests: exposure to a horizontal water spray
  • ISO 21940-11:2016/DAMD 1 Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour — Amendment 1
  • ISO/DIS 21725-1 Simplified design of prestressed concrete bridges — Part 1: I-girder bridges
  • ISO/DIS 21219-16 Intelligent transport systems — Traffic and travel information (TTI) via transport protocol exports group, generation 2 (TPEG2) — Part 16: Fuel price information and availability (TPEG2-FPI)
  • ISO/DIS 22156 Bamboo — Structural design
  • ISO/DIS 7788 Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements

ITSDF

BSR/ITSDF B56.14-200x (R202x), Safety Standard for Vehicle Mounted Trucks (reaffirmation of ANSI/ITSDF B56.14-200x) – comment due November 2

NCPDP

  • BSR/NCPDP BUS v4.0-202x, NCPDP Billing Unit Standard v4.0 (revision and redesignation of ANSI/NCPDP BUS v3.1) – comment due October 26
  • BSR/NCPDP RTPB Standard v11-202x, NCPDP Real-Time Prescription Benefit Standard v11 (revision and redesignation of ANSI/NCPDP RTPB Standard v10-2020) – comment due October 26
  • BSR/NCPDP SC WG110085-202x, NCPDP SCRIPT Standard WG1100852021xx (revision and redesignation of ANSI/NCPDP SC v2020101) – comment due October 26
  • BSR/NCPDP Specialized Standard WG1100852021xx-202x, NCPDP Specialized Standard WG1100852021xx (revision and redesignation of ANSI/NCPDP Specialized Standard v2020101-2020) – comment due October 26

NEMA

  • BSR C18.2M, Part 2-202x, Portable Nickel Rechargeable Cells and BatteriesSafety Standard (revision of ANSI C18.2M, Part 2-2014) – comment due October 25
  • BSR C18.2M, Part 2-202x, Portable Nickel Rechargeable Cells and BatteriesSafety Standard (revision of ANSI C18.2M, Part 2-2014) – comment due October 25
  • BSR ICEA S-112-718-202x, Standard for Optical Fiber Cable for Placement in Sewer Environments (revision of ANSI/ICEA S-112-718-2013) – comment due October 26
  • BSR/NEMA/IEC 60974-5-202X, Arc Welding Equipment – Part 5: Wire feeders (national adoption of with modifications and revision of ANSI/NEMA/IEC 60974-5-2008) – comment due November 9
  • BSR C136.47-2010 (S202x), Steel Roadway and Area Lighting Poles (stabilized maintenance of ANSI C136.47-2010 (R2015)) – comment due November 23
  • BSR/NEMA HP 9-2014 (R202x), Electrical and Electronic Ethylene-Propylene Diene Elastomer (EPDM) Insulated Hook-Up Wire, Types EP (Rated 125°C; 600 V) and EPD (Rated 125°C; 5000 V) (reaffirmation of ANSI/NEMA HP 9-2014) – comment due November 23
  • BSR/NEMA HP 3-202x, Insulated High Temperature Hook-Up Wire; Types ET (250 Volts), E (600 Volts), and EE (1000 Volts) (revision of ANSI/NEMA HP 3-2011) – comment due November 23
  • BSR/NEMA HP 4-202x, Electrical and Electronic FEP (Fluorinated Ethylene Propylene) Insulated High Temperature Hook-Up Wire, Types KT (250 Volt), K (600 Volt), and KK (1000 Volt) (revision of ANSI/NEMA HP 4-2012) – comment due November 23
  • BSR C80.1-202x, Electric Rigid Steel Conduit (revision of ANSI C80.1-2015) – comment due November 23
  • BSR C80.3-202x, Electrical Metallic Tubing Steel (EMT-S) (revision of ANSI C80.3-2015) – comment due November 23
  • BSR C80.5-202x, Electrical Rigid Metal Conduit Aluminum (ERMC-A) (revision of ANSI C80.5-2015) – comment due November 23
  • BSR C50.41-2012 (R202x), Polyphase Induction Motors for Power Generating Stations (reaffirmation of ANSI C50.41-2012) – comment due November 30
  • BSR/NEMA ESM1-1-202x, Electrical Submeter – General Requirements (new standard) – comment due November 30

NFPA

  • BSR/NFPA 18A-202x, Standard on Water Additives for Fire Control and Vapor Mitigation (revision of ANSI/NFPA 18A-2017) – comment due November 9
  • BSR/NFPA 288-202x, Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resistance-Rated Assemblies (revision of ANSI/NFPA 288-2017) – comment due November 9
  • BSR/NFPA 252-202x, Standard Methods of Fire Tests of Door Assemblies (revision of ANSI/NFPA 252-2017) – comment due November 9
  • BSR/NFPA 257-202x, Standard on Fire Test for Window and Glass Block Assemblies (revision of ANSI/NFPA 257-2017) – comment due November 9
  • BSR/NFPA 268-202x, Standard Test Method for Determining Ignitability of Exterior Wall Assemblies Using a Radiant Heat Energy Source (revision of ANSI/NFPA 268-2017) – comment due November 9
  • BSR/NFPA 269-202x, Standard Test Method for Developing Toxic Potency Data for Use in Fire Hazard Modeling (revision of ANSI/NFPA 269-2017) – comment due November 9
  • BSR/NFPA 275-202x, Standard Method of Fire Tests for the Evaluation of Thermal Barriers (revision of ANSI/NFPA 275-2017) – comment due November 9
  • BSR/NFPA 285-202x, Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Wall Assemblies Containing Combustible Components (revision of ANSI/NFPA 285-2019) – comment due November 9
  • BSR/NFPA 287-202x, Standard Test Methods for Measurement of Flammability of Materials in Cleanrooms Using a Fire Propagation Apparatus (FPA) (revision of ANSI/NFPA 287-2017) – comment due November 9
  • BSR/NFPA 350-202x, Guide for Safe Confined Space Entry and Work (revision of ANSI/NFPA 350-2019) – comment due November 9
  • BSR/NFPA 385-202x, Standard for Tank Vehicles for Flammable and Combustible Liquids (revision of ANSI/NFPA 385-2017) – comment due November 9
  • BSR/NFPA 408-202x, Standard for Aircraft Hand Portable Fire Extinguishers (revision of ANSI/NFPA 408-2017) – comment due November 9
  • BSR/NFPA 550-202x, Guide to the Fire Safety Concepts Tree (revision of ANSI/NFPA 550-2017) – comment due November 9
  • BSR/NFPA 551-202x, Guide for the Evaluation of Fire Risk Assessments (revision of ANSI/NFPA 551-2019) – comment due November 9
  • BSR/NFPA 900-202x, Building Energy Code (revision of ANSI/NFPA 900-2019) – comment due November 9
  • BSR/NFPA 1150-202x, Standard on Foam Chemicals for Fires in Class A Fuels (revision of ANSI/NFPA 1150-2017) – comment due November 9

NISO

NSF

  • BSR/NSF 4-202x (i28r4), Commercial Cooking, Rethermalization, and Powered Hot Food Holding and Transportation Equipment (revision of ANSI/NSF 4-2019) – comment due October 25
  • BSR/NSF 169-202x (i10r1), Special Purpose Food Equipment and Devices (revision of ANSI/NSF 169-2016) – comment due October 25
  • BSR/NSF 245-202x (i19r3), Residential Wastewater Treatment Systems – Nitrogen Reduction (revision of ANSI/NSF 245-2019) – comment due October 25
  • BSR/NSF 4-202x (i28r4), Commercial Cooking, Rethermalization, and Powered Hot Food Holding and Transportation Equipment (revision of ANSI/NSF 4-2019) – comment due October 25
  • BSR/NSF 169-202x (i10r1), Special Purpose Food Equipment and Devices (revision of ANSI/NSF 169-2016) – comment due October 25
  • BSR/NSF 245-202x (i19r3), Residential Wastewater Treatment Systems – Nitrogen Reduction (revision of ANSI/NSF 245-2019) – comment due October 25
  • BSR/NSF 49-202x (i141r2), Biosafety Cabinetry: Design, Construction, Performance, and Field Certification (revision of ANSI/NSF 49-2019) – comment due October 26
  • BSR/NSF 49-202x (i141r2), Biosafety Cabinetry: Design, Construction, Performance, and Field Certification (revision of ANSI/NSF 49-2019) – comment due October 26
  • BSR/NSF/CAN 50-202x (i163r2), Equipment and Chemicals for Swimming Pools, Spas, Hot Tubs, and Other Recreational Water Facilities (revision of ANSI/NSF/CAN 50-2019) – comment due October 26
  • BSR/NSF 4-202x (i25r3), Commercial Cooking, Rethermalization, and Powered Hot Food Holding and Transportation Equipment (revision of ANSI/NSF 4-2019) – comment due November 8
  • BSR/NSF 59-202x (i9r1), Mobile Food Carts (revision of ANSI/NSF 59-2017) – comment due November 8
  • BSR/NSF 245-202x (i21r1), Residential Wastewater Treatment Systems – Nitrogen Reduction (revision of ANSI/NSF 245-2019) – comment due November 8
  • BSR/NSF 330-202x (i11r2), Glossary of Drinking Water Treatment Unit Terminology (revision of ANSI/NSF 330-2019) – comment due November 8
  • BSR/NSF/CAN 50-202x (i160r5), Equipment and Chemicals for Swimming Pools, Spas, Hot Tubs, and Other Recreational Water Facilities (revision of ANSI/NSF/CAN 50-2019) – comment due November 8
  • BSR/BIFMA e3-202x (i24r1), BIFMA e3-2019 Addendum: Furniture Sustainability Standard (addenda to ANSI/BIFMA e3-2019) – comment due November 15
  • BSR/NSF 40-2019 (i38r1) (R202x), Residential Wastewater Treatment Systems (reaffirmation of ANSI/NSF 40-2019 (i34r1)) – comment due November 15
  • BSR/NSF 41-202x (i10r1), Non-liquid Saturated Treatment Systems (revision of ANSI/NSF 41-2019) – comment due November 15
  • BSR/NSF 18-202x (i18r1), Manual Food and Beverage Dispensing Equipment (revision of ANSI/NSF 18-2016) – comment due November 15
  • BSR/NSF 40-202x (i37r1), Residential Wastewater Treatment Systems (revision of ANSI/NSF 40-2019) – comment due November 15
  • BSR/NSF 46-202x (i36r1), Evaluation of Components and Devices Used in Wastewater Treatment Systems (revision of ANSI/NSF 46-2018) – comment due November 15
  • BSR/NSF 245-202x (i20r1), Residential Wastewater Treatment Systems – Nitrogen Reduction (revision of ANSI/NSF 245-2019) – comment due November 15
  • BSR/NSF 350-202x (i57r1), Onsite Residential and Commercial Water Reuse Treatment Systems (revision of ANSI/NSF 350-2019) – comment due November 15
  • BSR/NSF 40-202x (i39r1), Residential Wastewater Treatment Systems (revision of ANSI/NSF 40-2019) – comment due November 22
  • BSR/NSF 40-202x (i41r1), Residential Wastewater Treatment Systems (revision of ANSI/NSF 40-2019) – comment due November 22
  • BSR/NSF 245-202x (i22r1), Residential Wastewater Treatment Systems – Nitrogen Reduction (revision of ANSI/NSF 245-2019) – comment due November 22
  • BSR/NSF 245-202x (i24r1), Residential Wastewater Treatment Systems – Nitrogen Reduction (revision of ANSI/NSF 245-2019) – comment due November 22
  • BSR/NSF 49-202x (i141r3), Biosafety Cabinetry: Design, Construction, Performance, and Field Certification (revision of ANSI/NSF 49-2019) – comment due November 23
  • BSR/NSF 49-202x (i153r2), Biosafety Cabinetry: Design, Construction, Performance, and Field Certification (revision of ANSI/NSF 49-2019) – comment due November 23

PLASTICS

  • BSR/PLASTICS B151.27-202X, Safety Requirements for Robot / Injection Molding Machine Systems (revision and redesignation of ANSI/SPI B151.27-2013) – comment due November 23

RESNA

  • BSR/RESNA IF-1-202x, RESNA Standard for Inclusive Fitness – Volume 1: RESNA Standard for Inclusive Fitness Environments (revision of ANSI/RESNA IF-1-2018) – comment due November 30

RIA

  • BSR/RIA R15.08-1-202x, Industrial Mobile Robots – Safety Requirements – Part 1: Requirements for the Industrial Mobile Robot (new standard) – comment due November 2

SCTE

  • BSR/SCTE 130-4-202x, Digital Program Insertion – Advertising Systems Interfaces – Part 4: Content Information Service (CIS) (revision and redesignation of ANSI/SCTE 130-4-2015) – comment due November 2
  • BSR/SCTE 130-05-202x, Digital Program Insertion – Advertising Systems Interfaces – Part 5: Placement Opportunity Information Service (POIS) (revision of ANSI/SCTE 130-5-2016) – comment due November 2
  • BSR/SCTE 130-07-202x, Digital Program Insertion – Advertising Systems Interfaces – Part 7: Message Transport (revision of ANSI/SCTE 130-07 2016) – comment due November 2
  • BSR/SCTE 213-202x, Edge and Core Facilities Energy Metrics (revision of ANSI/SCTE 213-2015) – comment due November 9
  • BSR/SCTE 212-202x, Cable Operator Energy Audit Framework and Establishment of Energy Baseline (revision of ANSI/SCTE 212-2015) – comment due November 30
  • BSR/SCTE 224-202x, Event Scheduling and Notification Interface (ESNI) (revision of ANSI/SCTE 224-2018) – comment due November 30
  • BSR/SCTE 262-1-202x, DOCSIS 4.0 Part 1: Physical Layer Specification (new standard) – comment due December 7
  • BSR/SCTE 262-2-202x, DOCSIS 4.0 Part 2: MAC and Upper Layer Protocols Interface Specification (new standard) – comment due December 7
  • BSR/SCTE 262-3-202x, DOCSIS 4.0 Part 3: Cable Modem Operations Support System Interface Specification (new standard) – comment due December 7
  • BSR/SCTE 262-4-202x, DOCSIS 4.0 Part 4: CCAP™ Operations Support System Interface Specification (new standard) – comment due December 7
  • BSR/SCTE 262-5-202x, DOCSIS 4.0 Part 5: Security Specification (new standard) – comment due December 7

SPRI

  • BSR/SPRI IA-1-202x, Standard Field Test Procedure for Determining the Uplift Resistance of Insulation and Insulation Adhesives over Various Substrates (revision of ANSI/SPRI IA-1-2015) – comment due November 23

UL

  • BSR/UL 61800-5-1-202x, Standard for Safety for Adjustable Speed Electrical Power Drive Systems – Part 5-1: Safety Requirements – Electrical, Thermal and Energy (national adoption of IEC 61800-5-1 with modifications and revision of ANSI/UL 61800-5-1-2020) – comment due October 25
  • BSR/UL 61800-5-2-202x, Standard for Safety for Adjustable Speed Electrical Power Drive Systems – Part 5-2: Safety Requirements – Functional (national adoption of IEC 61800-5-2 with modifications and revision of ANSI/UL 61800-5-2-2012 (R2017)) – comment due October 25
  • BSR/UL 79-202x, Standard for Safety for Power-Operated Pumps for Petroleum Dispensing Products (revision of ANSI/UL 79-2020) – comment due October 25
  • BSR/UL 296-202x, Standard for Safety for Oil Burners (revision of ANSI/UL 296-2017) – comment due October 25
  • BSR/UL 498A-202x, Standard for Safety for Current Taps and Adapters (revision of ANSI/UL 498A-2020) – comment due October 25
  • BSR/UL 827-202X, Standard for Safety for Central-Station Alarm Services (revision of ANSI/UL 827-2019) – comment due October 25
  • BSR/UL 2353-202x, Standard for Safety for Single- and Multi-Layer Insulated Winding Wire (revision of ANSI/UL 2353-2018) – comment due October 25
  • BSR/UL 6703-202x, Standard for Safety for Connectors for Use in Photovoltaic Systems (revision of ANSI/UL 6703-2017) – comment due October 25
  • BSR/UL 2167-202X, Standard for Water Mist Nozzles for Fire Protection Service (revision of ANSI/UL 2167-2011 (R2017)) – comment due October 26
  • BSR/ASME PTC 18-202x, Hydraulic Turbines and Pump-Turbines (revision of ANSI/ASME PTC 18-2011) – comment due October 27
  • BSR/UL 3741-202x, Standard for Safety for Standard for Safety for Photovoltaic Hazard Control (new standard) – comment due November 2
  • BSR/UL 1963-202x, Standard for Safety for Refrigerant Recovery/Recycling Equipment (revision of ANSI/UL 1963-2013) – comment due November 2
  • BSR/UL 5800-202x, Standard for Safety for Battery Fire Containment Products (new standard) – comment due November 8
  • BSR/UL 44-202X, Standard for Safety for Thermoset-Insulated Wires and Cables (revision of ANSI/UL 44-2018) – comment due November 8
  • BSR/UL 144-202x, Standard for Safety for LP-Gas Regulators (revision of ANSI/UL 144-2019) – comment due November 8
  • BSR/UL 414-202x, Standard for Safety for Meter Sockets (revision of ANSI/UL 414-2020) – comment due November 8
  • BSR/UL 875-202x, Standard for Safety for Electric Dry-Bath Heaters (revision of ANSI/UL 875-2017) – comment due November 8
  • BSR/UL 62841-3-7-202x, Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery – Safety – Part 3-7: Particular Requirements For Transportable Wall Saws (new standard) – comment due November 9
  • BSR/UL 498-202x, Standard for Safety for Attachment Plugs and Receptacles (revision of ANSI/UL 498-2020) – comment due November 9
  • BSR/UL 121203-202x, Recommended Practice for Portable/Personal Electronic Products Suitable for Use in Class I, Division 2, Class I, Zone 2, Class II, Division 2, Class III, Division 1, Class III, Division 2, Zone 21 and Zone 22 Hazardous (Classified) Locations (revision and redesignation of ANSI/UL 121203-2011 (R2015)) – comment due November 9
  • BSR/UL 444-202X, Standard for Safety for Communications Cables (revision of ANSI/UL 444-2018) – comment due November 15
  • BSR/UL 541-202x, Standard for Safety for Refrigerated Vending Machines (revision of ANSI/UL 541-2018) – comment due November 15
  • BSR/UL 588-202X, Standard for Safety for Seasonal and Holiday Decorative Products (revision of ANSI/UL 588-2018) – comment due November 15
  • BSR/UL 746A-202x, Standard for Safety for Polymeric Materials – Short Term Property Evaluations (revision of ANSI/UL 746A-2020) – comment due November 15
  • BSR/UL 231-202x, Standard for Safety for Power Outlets (revision of ANSI/UL 231-2020) – comment due November 22
  • BSR/UL 555C-202x, Standard for Ceiling Dampers (revision of ANSI/UL 555C-2017) – comment due November 22
  • BSR/UL 779-202x, Standard for Safety for Electrically Conductive Floorings (revision of ANSI/UL 779-2011 (R2016)) – comment due November 22
  • BSR/UL 823-202x, Standard for Safety for Electric Heaters for Use in Hazardous (Classified) Locations Electric Heaters (revision of ANSI/UL 823-2019) – comment due November 22
  • BSR/UL 1067-202x, Standard for Safety for Electrically Conductive Equipment and Materials for Use in Flammable Anesthetizing Locations (revision of ANSI/UL 1067-2011 (R2015)) – comment due November 22
  • BSR/UL 1203-202x, Standard for Safety for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations (revision of ANSI/UL 1203-2020) – comment due November 22
  • BSR/UL 1993-202x, Standard for Safety for Self-Ballasted Lamps and Lamp Adapters (revision of ANSI/UL 1993-2018) – comment due November 23
  • BSR/UL 80079-36-202x, Standard for Safety for Explosive Atmospheres – Part 36: Non-Electrical Equipment for Explosive Atmospheres – Basic Method and Requirements (national adoption with modifications of ISO/IEC 80079-36) – comment due November 24
  • BSR/UL 80079-37-202x, Standard for Safety for Explosive Atmospheres – Part 37: Non-Electrical Equipment for Explosive Atmospheres – Non Electrical Type of Protection Constructional Safety c, Control of Ignition Source b, Liquid Immersion k (national adoption with modifications of ISO/IEC 80079-37) – comment due November 24
  • BSR/UL 224-202x, Standard for Extruded Insulating Tubing (revision of ANSI/UL 224-2010 (R2016)) – comment due November 30
  • BSR/UL 1598-202x, Standard for Safety for Luminaires (revision of ANSI/UL 1598-2018) – comment due November 30
  • BSR/UL 61010-2-040-202x, Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use – Part 2-040: Particular Requirements for Sterilizers and Washer-Disinfectors Used to Treat Medical Materials (identical national adoption of IEC 61010-2-040 and revision of ANSI/UL 61010-2-040-2016) – comment due December 7
  • BSR/UL 2610-202X, Standard for Safety for Commercial Premises Security Alarm Units and Systems (revision of ANSI/UL 2610 -2020) – comment due December 7
  • BSR/UL 8750-202x, Standard for Safety for Light Emitting Diode (LED) Equipment for Use in Lighting Products (revision of ANSI/UL 8750-2020) – comment due December 7
  • BSR/UL 60335-2-67-202x, Standard for Safety for Household and Similar Electrical Appliances – Safety – Part 2-67: Particular Requirements for Floor Treatment Machines, for Commercial Use (revision of ANSI/UL 60335-2-67-2017) – comment due December 8
  • BSR/UL 746F-202x, Standard for Safety for Polymeric Materials – Flexible Dielectric Film Materials for Use in Printed-Wiring Boards and Flexible Materials Interconnect Constructions (revision of ANSI/UL 746F-2016) – comment due December 15
  • BSR/UL 796F-202X, Standard for Safety for Flexible Materials – Interconnect Constructions (revision of ANSI/UL 796F-2016) – comment due December 15
  • BSR/UL 2158-202x, Standard for Safety for Electric Clothes Dryers (revision of ANSI/UL 2158-2019) – comment due December 15
  • BSR/UL 60335-2-72-202x, Standard for Safety for Household and Similar Electrical Appliances – Safety – Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use. (revision of ANSI/UL 60335-2-72-2019) – comment due December 22

VITA

  • BSR/VITA 67.3-202x, Coaxial Interconnect on VPX, Spring-Loaded Contact on Backplane (revision of ANSI/VITA 67.3-2017) – comment due November 30

WDMA

  • BSR/WDMA I.S.1A-202x, Industry Standard for Interior Architectural Wood Flush Doors (revision of ANSI/WDMA I.S. 1A-2013) – comment due November 9
  • BSR/WDMA I.S.6A-202x, Industry Standard for interior Architectural Wood Stile and Rail Doors (revision of ANSI/WDMA I.S.6A-2013) – comment due November 9

2 Responses

Add a Comment

You must be logged in to post a comment